[ddots-l] Re: Focusrite safire 6 problems
- From: "Tim Burgess" <tim@xxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 24 Jan 2011 09:10:23 -0000
Focusrite tech support recommend ASIO as a default.
Best wishes.
Tim Burgess
Raised Bar Ltd
Phone: +44 (0)1827 719822
Don't forget to vote for improved access to music and music technology at
http://www.raisedbar.net/petition.htm
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of D!J!X!
Sent: 24 January 2011 03:28
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Focusrite safire 6 problems
Is this the case for all saffires?
THX, D!J!X!
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Phil Muir
Sent: Sunday, January 23, 2011 6:48 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Focusrite safire 6 problems
I would switch to using ASIO drivers as they are generally the best option
at the moment for Focusrite gear. Not personally recommending this
interface as it's USB 1.1 which is not good for recording audio and
softsynthes with a high track count. Shame really as you can do a lot with
all of the hardware switches on the box E.G, turn a stereo source to mono
etc. Anyway, getting back to USB1.1, From the manual:
"Whilst Saffire 6 USB is a USB 1.1 device, the USB connection will work with
any USB 1.1 or USB 2.0 compliant connector on your computer."
Regards, Phil Muir
Accessibility Training
Telephone: US (615) 713-2021
UK +44-1747-821-794
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxxxxxxxxxxxxxxxxx
URL:
http://www.accessibilitytraining.co.uk/
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Nickus de Vos
Sent: 22 January 2011 14:46
To: Dancing dots
Subject: [ddots-l] Focusrite safire 6 problems
Hi all, i just got my focusrite safire 6, i installed the drivers, plugged
it in and opend sonar. When i plug in a mic and get level it sounds as if
it's distorting and there's a slight delay, this happens at about -5 dB SO
I'M NOT TOO LOUD. I prosume it's a latency problem and i have no clue to fix
it, firstly in audio options at driver mode, which is best to select,
wasapi, wdm/ks, asio or mme 32 bit? Then the playback and record buffers are
set to 256, on the general tab it's set to 16 bit 44.1 KHz, buffers in
playback q is on 2 and buffer size is 5%. I would appriciate any help when
it comes to drivers, buffers and latency i'm a nobody.,
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject?q or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
