Kim, Try reinstalling CT 4 but only install it into 6.2. The installation program should give you a chance to uncheck 6.0. Select the "Options" button in the Welcome screen of the installation program and check the box that says prompt for new authorization. Have your authoriaztion code ready to enter. Going from memory here as I'm away from our office this week but give that a try. Regards, Bill ----- Original Message ----- From: Kim Ellsworth To: ddots-l@xxxxxxxxxxxxx Sent: Tuesday, October 10, 2006 10:41 PM Subject: [ddots-l] CT 4.03 and JAWS 6.x Hi all, Hopefully someone will have an explanation for the following problem. I installed CT 4.03 to both JAWS 6.0 and 6.2. If I run JAWS 6.0 and Sonar 4 and press insert+q I am told that the CT scripts are running just as I would expect. If I run JAWS 6.2 and Sonar 4 and press insert+q I am told that the default settings are loaded. If I look in the JAWS 6.2 sub menu, explore JAWS settings, explore user settings all of the files are there. During the loading of Sonar it sounds normal and I am told that the CT 4.03 settings are there but that doesn't seem to be true. If I turn on keyboard help with insert+1 and press the letter a I expect to hear messages about arming tracks but I hear nothing except the letter a. Pressing h 7 times doesn't do anything like I am told to do to learn how to fix a problem concerning alt tabbing out and back into Sonar. I even copied the files over from the JAWS 6.0 folder to the 6.2 folder and allowed them to overwrite but no success. Am I stuck using JAWS 6.0? Thanks in advance, Kim