Indeed I do that hear quite often. take care.
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of James Malone
Sent: Tuesday, July 18, 2017 11:48 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Bouncing a soft symth track to audio
Well, Something I might be missing then.
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of DJX
Sent: Tuesday, July 18, 2017 4:22 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Bouncing a soft symth track to audio
When exporting, audio from external synths/keyboards won't be present unless
you first take each midi track and record the sounds into sonar as audio.
For internal/soft synths, you shouldn't have to do this.
Regards, DJX
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of James Malone
Sent: Monday, July 17, 2017 11:11 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Bouncing a soft symth track to audio
Also, when I tried the export tracks, all of my tracks were there except the
synth midi track.
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of DJX
Sent: Monday, July 17, 2017 7:22 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Bouncing a soft symth track to audio
Do you mean mix down? If the project is done, when you use the Sonar export
audio function, it should all be there. You can bounce tracks out from sd if
you want to have them in the project as wav files (audio tracks) instead of
midi, or you could bounce the synth track.
HTH, DJX
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of James Malone
Sent: Monday, July 17, 2017 9:37 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Bouncing a soft symth track to audio
Hi all, I'm running in to a problem in regards to bouncing a midi track in
to my audio mix. In the recordings, I'm getting the keyboards, but not the
drums that I'm running in regards to audio output from the stereo mix of my
Superior drummer. Does the midi have to be converted, and if so how do I do
this?
I'm running Sonar 8.5 with CT 8.8. Also, I looked at the tutorial, but
couldn't find it anywhere.
James
http://www.cdbaby.com/jamesmalone
James Malone, (916)212-5397http://www.tunecore.com
<http://www.tunecore.com/>