[ddots-l] Re: Bank/Patch Changes Not Matching Up
- From: "Kim Ellsworth" <jbkim72@xxxxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Tue, 3 Oct 2006 16:27:02 -0400
Hi Everyone,
Woo hoo! Problem is solved and I'm so happy I could shout for everyone to
hear! Thank you everyone for all of your tips, comments and suggestions. I
received a response from Korg and indeed, I was missing a very important
couple of settings via the synthe. Here is what has to happen with regards
to the settings on the synthe for anyone with a Korg Triton Extreme. Might
also be helpful to others as well of course. My sighted daughter had to
help me make the settings but once they are saved, they don't have to be set
again.
1. In the Global options, touch System Pref, tab on the bottom of the screen
and set the bank Map to KORG. By default, it is set to GM2.
2. go to the top right corner of the screen, when in Global mode, and go to
Write Global settings and touch OK a
few times.. Whatever settings you have set in Global mode will be saved and
you will not have to reset them each time you turn off the keyboard.
Note: Once we had the bank map set to Korg, went ahead and saved the global
settings. Then, I went back into Global options, pressed the menu key,
touched midi P1, chose external USB, turned local off, made sure that bank
change was enabled and then chose the write global settings and okayed until
we were out of the screen. Now everything is working perfectly. So, now
it's time for me to begin to tackle other areas such as getting a mixer and
begin to record. I'm so excited! Grins.
Kind Regards,
Kim Ellsworth
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Sandy Licht
Sent: Monday, October 02, 2006 2:27 PM
To: ddots-l@xxxxxxxxxxxxx; ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Bank/Patch Changes Not Matching Up
I think this has to do with setting up your instrument definitions.
At 08:16 AM 10/2/2006, Omar Binno wrote:
>You might want to find a Triton user Forum and contacting them about
>the problem. If you explain to them that you're blind, the users on
>there are usually pretty helpful about giving detailed responses.
>You could also try contacting the cakewalk user forum with your problem
>as well.
>
>Omar Binno
>----- Original Message ----- From: "Kim Ellsworth"
><jbkim72@xxxxxxxxxxxxxxx>
>To: <ddots-l@xxxxxxxxxxxxx>
>Sent: Monday, October 02, 2006 7:34 AM
>Subject: [ddots-l] Re: Bank/Patch Changes Not Matching Up
>
>
>>Hi Tim,
>>
>>Thanks for writing and for trying to help. It is an exact match for the
>>Triton Extreme found at the Korg forum site. There were actually two
>>different .INS files there for the Triton Extreme, one was minus the
>>drum kits. I have even looked through the .INS file in Notepad and
>>the instruments do match up.
>>
>>I am sure this must be something simple that I just haven't hit on yet
>>and hopefully someone can help me get to the bottom of it. If you or
>>anyone has any further questions please let me know. Thanks again to
>>everyone who is trying to help here.
>>
>>With her fingers crossed,
>>Kim Ellsworth
>>
>>-----Original Message-----
>>From: ddots-l-bounce@xxxxxxxxxxxxx
>>[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Tim Burgess
>>Sent: Monday, October 02, 2006 3:36 AM
>>To: ddots-l@xxxxxxxxxxxxx
>>Subject: [ddots-l] Re: Bank/Patch Changes Not Matching Up
>>
>>Hi,
>>
>>Just checking - within the Korg.ins file, was there an exact match for
>>your synth or did you take an approximation?
>>
>>Best wishes.
>>
>>Tim Burgess
>>Raised Bar Ltd
>>Phone: +44 (0)1827 719822
>>
>>Don't forget to vote for change at
>>http://www.raisedbar.net/petition.htm
>>
>>-----Original Message-----
>>From: ddots-l-bounce@xxxxxxxxxxxxx
>>[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Kim Ellsworth
>>Sent: 02 October 2006 00:30
>>To: ddots-l@xxxxxxxxxxxxx
>>Subject: [ddots-l] Bank/Patch Changes Not Matching Up
>>
>>Hi everyone,
>>
>>Please, please help me! I no I almost have everything setup properly
>>between my synthesizer (Korg Triton Extreme), my sound card (M-Audio
>>Delta LT 1010) and my desktop computer. I've read and read the Cake
>>Talking tutorial on the subject of midi, hardware setup, etc. until
>>I'm blue in the face. I'm so close, yet still so far from being able to
start recording.
>>
>>Situation:
>>
>>1. Currently, my Korg is connected to the desktop via two routes; via
>>USB to the computer(we were told to do this by the dealer where we
>>bought the
>>synthe) and by two midi cables (input and output of course that go
>>directly to the sound card).
>>
>>2. Right now, until I can get a mixer, I have a set of monitor
>>speakers to listen to the synthesizer through.
>>3. I am running Sonar 4, producer edition and Cake Talking 4.0.3. OS
>>on desktop machine is Windows XP Home, SP2.
>>
>>4. I followed the instructions on configuring Sonar to recognize the
>>Delta 1010, ran the Cake Talk tests at the beginning of this whole
>>setup and everything was successful.
>>
>>5. I imported the korg.ins file in the import instrument deffinitions
>>dialog and that appeared successfull as the patch names for the banks
>>in the program and combi mode show up properly when choosing patch
>>names. However, when I cycle through the patch names after choosing a
>>bank via Sonar, the sounds do change on the synthe side but it's not
>>the correct patch; rather, no matter what bank I choose and what patch
>>I choose via sonar, it is only picking the synthesizer's general midi
>>patch sounds and not the sounds that are specific to the Korg.
>>Example, in Sonar, I choose Bank a, Patch name keyboard piano and
>>strings. This is a patch that on the actual synthesizer does indeed
>>belong to bank A. Yet, the synthe switches to harpsichord instead. Am I
making sense?
>>
>>By the way, Local Mode is set to off, enable bank, program and combi
>>changes are all turned on. I played around a bit with the input and
>>output of midi ports but currently I have the input set to the Delta
>>and the output set to USB audio device, which is how my Korg shows up
>>in Sonar and in the midi devices in my sounds and audio properties of my
computer.
>>
>>I apologize for making this a novel but trying to give as much
>>information as possible that may be of some help and also, I've been
>>working on trying to get this setup for a while now and a bit
>>frustrated that I cannot figure this thing out on my own.
>>
>>Kind Regards,
>>Kim Ellsworth
>>** To leave the list, click on the immediately-following link:-
>>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>** If this link doesn't work then send a message to:
>>** ddots-l-request@xxxxxxxxxxxxx
>>** and in the Subject line type
>>** unsubscribe
>>** For other list commands such as vacation mode, click on the
>>** immediately-following link:-
>>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>>** or send a message, to
>>** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>__________ NOD32 1.1786 (20061002) Information __________
>>
>>This message was checked by NOD32 antivirus system.
>>http://www.eset.com
>>
>>
>>** To leave the list, click on the immediately-following link:-
>>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>** If this link doesn't work then send a message to:
>>** ddots-l-request@xxxxxxxxxxxxx
>>** and in the Subject line type
>>** unsubscribe
>>** For other list commands such as vacation mode, click on the
>>** immediately-following link:-
>>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>>** or send a message, to
>>** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
>** To leave the list, click on the immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>** If this link doesn't work then send a message to:
>** ddots-l-request@xxxxxxxxxxxxx
>** and in the Subject line type
>** unsubscribe
>** For other list commands such as vacation mode, click on the
>** immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
>Subject:- faq
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.1.407 / Virus Database: 268.12.11/460 - Release Date:
>10/1/2006
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
__________ NOD32 1.1786 (20061002) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
