Isn't there also a menu item under "edit" that says something like "change velocity"? It can be used to change the velocities of a range of bars to reduce or increase, or you can set both values to the same number to set them all to a single value. Dave ----- Original Message ----- From: "D!J!X!" <megamansuperior@xxxxxxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Monday, January 04, 2010 09:58 Subject: [ddots-l] Re: A question Yes, ighilight the track, select the area of notes that you want to affect, go to process, midi fx, cakewalk, velocity, then either choose a preset, or use the jaws cursor, before the line of ok cancel buttons, you'll hear something like 100 tab, 0 tab etc. Use the mouse left click to click on the 100 tab, type in the desired velocity, press enter, then tab over to the ok button... HTH, D!J!X! -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Patryk Mis Sent: Monday, January 04, 2010 10:41 AM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: A question Thanks, this info is also useful for me. Is there any option to set same velosity for all notes of one track? Regards, Patryk. W dniu 2010-01-04 16:22, Omar Binno pisze: > Yes, when you use the quantize function, it gives you the option of > making notes the same duration. give that a shot. > Omar Binno > Website: www.omarbinno.com <http://www.omarbinno.com> > AIM: LOD1116 > Skype: obinno1 > > ----- Original Message ----- > *From:* blue wings <mailto:bluewings1983@xxxxxxxxx> > *To:* ddots-l@xxxxxxxxxxxxx <mailto:ddots-l@xxxxxxxxxxxxx> > *Sent:* Monday, January 04, 2010 10:15 AM > *Subject:* [ddots-l] A question > > Hi all > I have a question, is it possible to automatically set the same > duration of all notes in the project? For example, I recorded the > track of pad, or very fast arpegiator, but it's impossible to play > it equally. let's say that I want to record the pad and I want the > duration of all notes to have 1 bar, or I want the duration of my > arpegiator to have 480 ticks. Now I must go to event view and set > everything manually which takes some time. Is there any way to do it > faster in sonar? > Regards, Ralf. PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq