[softwarelist] Re: icnclipbrd 0.12
- From: Dr Peter Young <pnyoung@xxxxxxxxxxxx>
- To: davidpilling@xxxxxxxxxxxxx
- Date: Fri, 23 Nov 2007 12:34:12 GMT
On 23 Nov 2007 David Pilling <flist@xxxxxxxxxxxxxxxxxxx> wrote:
> In message <2fd661424f.steve@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>, Steve Fryatt
> <lists@xxxxxxxxxxxxxxxxxx> writes
>>The fault could easily lie on either side: the RAM XFer code in IcnClipBrd
>>had been commented out since I took over the module, and -- although I've
>>gone through it all carefully and tested it as much as possible -- there's
>>a possibility that it was disabled for a reason.
> Just to keep everyone up to date. Entirely due to Steve Fryatt's efforts
> the problem with icnclipbrd is now solved.
> I'll produce a new version of OP for RISC OS soon which fixes the
> problem.
> The ram transfer code in OP has been making assumptions about the
> behaviour of other programs which are not justified by the Acorn
> specification of the protocol.
Excellent, and very many thanks.
With best wishes,
Peter.
--
Peter \ / \ Prestbury, Cheltenham, Glos. GL52
Anne \ / __ __ \ England.
and / / \ | | |\ | / _ \ http://pnyoung.orpheusweb.co.uk
family / \__/ \_/ | \| \__/ \______________ pnyoung@xxxxxxxxxxxxx
Other related posts:
