After failing to find what was running the old version of CLIB under Virtual RISCPC I took the suggestion below, uncommented out the line in OvationPro !Run file loading CLib, changing it to current version and it loads TransIMP no problem. Thanks Bob Hughes -----Original Message----- From: davidpilling-bounce@xxxxxxxxxxxxx [mailto:davidpilling-bounce@xxxxxxxxxxxxx] On Behalf Of David Pilling Sent: 25 April 2012 19:06 To: davidpilling@xxxxxxxxxxxxx Subject: [softwarelist] Re: !TRANSIMP problem Hi, In message <$kB6fQDATDmPFwjz@xxxxxxxxxxxxxxxxxxx>, David Pilling <flist@xxxxxxxxxxxxxxxxxxx> writes >I've had a busy day, eventually time will permit me to turn on the >Iyonix and come up with some better researched comments. Yeah, there's a load of lines in !OvnPro.!Run which are commented. They came from the first Iyonix versions, and as I say time went on and what was need to run OP became less stringent, so I commented them. Problem is I can't see anything in the !Run that is demanding any version of the C lib. Two ideas, if your C lib is far out of date the actual code will complain, second idea, have you inserted something in !OvnPro.Autorun, or Applets. There's been all the talk above about TransIMP - seemingly not an immediate requirement for running OP. People sometimes stick that inside !OvnPro, result, run !OvnPro causes TransIMP (or whatever) to run. -- David Pilling email: david@xxxxxxxxxxxxxxxxxxx web: http://www.davidpilling.net To unsubscribe or subscribe goto: //www.freelists.org/list/davidpilling To unsubscribe or subscribe goto: //www.freelists.org/list/davidpilling