Martin Wuerthner <public@xxxxxxxxxxxxxxx> wrote: > "Chris Bell (Lists)" <lists@xxxxxxxxxxxx> wrote: > > I've produced a 2-sided OvnPro document which includes some colour > > photos: > > www.prostate-cancer-support.co.uk/docs/sponsor2012 > > If I print this direct to my PS printer (using a PS2 or PS3 driver) > > then the printed colours are awful - as if they've been reduced to > > just a handful of full tones. > I printed this to a file using the PS3 driver and looked at the file > (2,617,118 bytes) and all the colour information is there, so the > degradation of quality happens inside your printer. Maybe it has run > out of memory? > You can improve the chances of printing these images correctly by > allowing OvationPro and the PostScript driver to pass them to your > printer in their original format, i.e., as compressed JPEGs. At the > moment, OvationPro has to expand them to uncompressed full colour > bitmaps because you have some picture processing applied. Please note > that you cannot remove the processing once applied, so in order to > try this you need to delete the frames and reimport the images. > Martin Many thanks, Martin. That sounds very feasable. I'll check it later on and report back. Chris. To unsubscribe or subscribe goto: //www.freelists.org/list/davidpilling