[softwarelist] Re: OvPro and RO 5.23
- From: Dave Symes <dave@xxxxxxxxxxxxx>
- To: davidpilling@xxxxxxxxxxxxx
- Date: Sun, 26 Mar 2017 14:51:04 +0100
In article <mpro.onfbmt05s7mpd021i.lists@xxxxxxxxxxxxxxxxxx>,
Steve Fryatt <lists@xxxxxxxxxxxxxxxxxx> wrote:
The value of Obey$Dir will change many times as O-Pro starts, since each
Applet will have its own file. The problem is knowing what it was set to
when the error occurred, assuming that O-Pro continues initialising
things after the error.
That said, Reporter, with error logging on, should report the offending
file, I think.
Indeed sort of, eventually.
I'd done a mass of manual checking through the Applets and eventually
found what I thought was the culprit. "!MakeRTF"
Reporter had Error logging on but that didn't show up anything specific,
so I switched on Command > Obey Only as well.
Ran OvPro and when it got to "...!OvnPro.Applets.!MakeRTF.!Run" it was
followed by the error message, so I knew I'd hit correct source with my
manual effort.
Obviously if I'd remembered Command > Obey Only logging was off it would
have been an easier and quicker journey.
Dave
--
Dave Triffid
To unsubscribe or subscribe goto:
//www.freelists.org/list/davidpilling
Other related posts:
