On 3 Jun 2006 Clive Bonsall <C.Bonsall@xxxxxxxx> wrote: > David Pilling wrote: >>> After complaining about unknown tags ... The 1200dpi/53Mb file will >>> not load into either AW2 or OP on either system ("File could not be >>> converted"). The 600dpi/13Mb file will load, but it takes quite a few >>> seconds -- my impression is that it was significantly quicker with >>> VRPC than on the Iyonix. >> >> Thanks for the example. >> >> My guess is this. The actual file conversion program (convert inside >> TransTIFF) can handle the image, however it is not being given enough >> memory. These are big files. What may help is to set your next slot >> (task manager) to e.g. 128MB. > > Using the slider I can only increase the Next value to a maximum of 28MB > -- on both the Iyonix and VRPC. The 1200dpi/53MB file will still not > load. Is there a way of increasing Next to a higher value from the > command line? Not while Aemulor is running. With best wishes, Peter. -- Peter \ / \ Prestbury, Cheltenham, Glos. GL52 Anne \ / __ __ \ England. and / / \ | | |\ | / _ \ http://pnyoung.orpheusweb.co.uk family / \__/ \_/ | \| \__/ \______________ pnyoung@xxxxxxxxxxxxxx