[softwarelist] Re: Embedding an object
- From: Dave Symes <dave@xxxxxxxxxxxxx>
- To: davidpilling@xxxxxxxxxxxxx
- Date: Fri, 10 May 2019 07:04:45 +0100
In article <21fc005e-f96a-3663-2f42-5fa3f8ecb0b0@xxxxxxxxxxxxxxxx>,
David Pilling <david@xxxxxxxxxxxxxxxx> wrote:
Hi Dave,
On 09/05/2019 19:18, Dave Symes wrote:
I have grabs of them should you be interested.
I see what you're saying from the screen grabs, but that's not my
experience, in my example the frame does move. I'm not so sure the
redraw is always perfect, so might be worth dragging something over the
text after applying the shift.
Mmnnn!
As I've been using OvPro since it first arrived (Must be 20 years ago?),
I'm aware of the Q & D redraw, so I always scroll the acted upon "Thing"
out of view and back again to force a redraw.
I must be misunderstanding the action of V-Shift.
I set up a new embedded frame tester with text above and below the
embedded frame.
I assumed it would adjust the position of the 'hilighted' embedded frame
item, but what it does is shift the text below the embedded frame up for a
negative number and down for a positive number.
The embedded frame remains in exactly the same position...
I've noted the Y coordinates of the embedded frame, it does not change.
A bemused...
Dave
--
Dave Triffid
To unsubscribe or subscribe goto:
//www.freelists.org/list/davidpilling
Other related posts:
