[chadfree] Re: Trying to fix a pc

  • From: "Ross" <ross72003@xxxxxxx>
  • To: <chadfree@xxxxxxxxxxxxx>
  • Date: Sat, 17 Apr 2004 20:46:18 -0400

Mac
When that happened to my first computer I put a blindfold over the monitor
and shot it.
Ross


----- Original Message ----- 
From: "Surfin Mac" <surfinmac2002@xxxxxxxxx>
To: <chadfree@xxxxxxxxxxxxx>
Sent: Saturday, April 17, 2004 8:40 PM
Subject: [chadfree] Re: Trying to fix a pc


> Guess the motherboard is bad, couldn't get it to power up. The power
supply
> seems to be working as when the power is turned on the lights came on and
> before they were taken out the floppy drive and cd lights came on. No
beeps
> and nothing on the monitor.
> Thanks any way,
>
> Mac (Martha)
> Trying to figure it out
> http://www.marthas-web.com
>
> ----- Original Message ----- 
> From: "T. Hunt" <ilrover@xxxxxxxxxxxxxx>
> To: <chadfree@xxxxxxxxxxxxx>
> Sent: Saturday, April 17, 2004 5:56 PM
> Subject: [chadfree] Re: Trying to fix a pc
>
>
> Mac-
>
> Open case, pull everything out.  That is, remove any add in cards,
> disconnect the ribbon cables at the motherboard, unplug any peripherals
> and remove all memory and then replace one DIMM only, Vasyli.  Also,
> unplug the Molex (power) connectors from the harddrives and the CD's.
> Plug in the keyboard, connect the monitor (you have to leave the video
> card in) and the power cord.  Now try to power up.  If it works, connect
> the floppy drive ribbon cable and power and try again.  If it powers up,
> run a diagnostic and see what the results are.
>
> Tom
>
> Surfin Mac wrote:
> > I am pretty sure this is a hardware problem, but can't figure out what.
I
> am trying to revive a Compaq Presario 7360.
> > So far:
> > Turn on computer, power lights up, but nothing else happens.
> > Try using a boot disk, nothing happens.
> > try same things again & nothing happens.
> > Try a boot disk again and get boot disk menu, then nothing happens.
> > Any ideas?
> > Mac (Martha)
> > Trying to figure it out
> > http://www.marthas-web.com
>
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> Was this forwarded to you?  Want to subscribe?  Send an email
> to chadfree-request@xxxxxxxxxxxxx?Subject=subscribe.
>
> For a complete list of email commands for our list send an email
> to ecartis@xxxxxxxxxxxxx with a subject line of "info chadfree" without
the
> quotes.
>
> If you wish to unsubscribe from our list send an email to;
>  chadfree-request@xxxxxxxxxxxxx?Subject=unsubscribe
>
> To contact the list moderators send an email to
> chadfree-moderators@xxxxxxxxxxxxx
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
>
>
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> Was this forwarded to you?  Want to subscribe?  Send an email
> to chadfree-request@xxxxxxxxxxxxx?Subject=subscribe.
>
> For a complete list of email commands for our list send an email
> to ecartis@xxxxxxxxxxxxx with a subject line of "info chadfree" without
the quotes.
>
> If you wish to unsubscribe from our list send an email to;
>  chadfree-request@xxxxxxxxxxxxx?Subject=unsubscribe
>
> To contact the list moderators send an email to
chadfree-moderators@xxxxxxxxxxxxx
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
>



-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Was this forwarded to you?  Want to subscribe?  Send an email 
to chadfree-request@xxxxxxxxxxxxx?Subject=subscribe.

For a complete list of email commands for our list send an email 
to ecartis@xxxxxxxxxxxxx with a subject line of "info chadfree" without the 
quotes.

If you wish to unsubscribe from our list send an email to;
 chadfree-request@xxxxxxxxxxxxx?Subject=unsubscribe

To contact the list moderators send an email to 
chadfree-moderators@xxxxxxxxxxxxx
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Other related posts: