[cad-linux] Re: binary of lx viewer

  • From: <alvin@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
  • To: cad-linux@xxxxxxxxxxxxx
  • Date: Thu, 9 May 2002 18:42:02 -0700 (PDT)

hi andy

if you're referring to me...
        - yes... its all on... and thawed...

        i can zoom in and out... exts too..

        see one layer ... but nothing else...
        ( not the layer of the front panel - the metal )

http://www.Custom-Chassis.net/Drawings/FP ...

On Thu, 9 May 2002 AJBIBB@xxxxxxx wrote:

> Whatever layers were on and thawed  when the drawing was saved will be on and 
> thawed when LX_Viewer loads the drawing.  When you first start the program 
> you are presented with a black screen which appears similar to an ACAD 
> prototype drawing.  This is something I need to fix because at this point 
> there is no drawing loaded or active, so no layers show up in the layer bar. 
> You need to open an existing file to get the layers to appear in the bar.
> BTW: 095a still has the layer bar for quick changes to the properties of a 
> single layer, but also adds a full layer dialog which is much easier to use 
> for changing groups of layers.
> Keith - the binary is not going to make it to Sourceforge until Monday, sorry 
> about that.
> Andy

Other related posts: