Hi,
Thanks much for the help, getting there.
Have any of you found an accessible way of changing hotkeys?
the control+shift+backslash key doesn't work for reading back clearences
or anything else for some odd reason.
Thanks for any help,
Daniel
On 1/26/2017 5:33 PM, Zachary Kline wrote:
Daniel,
After some extensive testing, Mike determined that the problem with the 0
being recognized had to do with the default MS ATC window being opened. If
you say “BVI ATC off,” and possibly hit the grave accent key, to the left of
the number 1, things should be much more pleasant. As far as reading the
frequencies goes, you can use NVDA OCR on the electronic kneeboard window,
which is what is actually displayed, or look them up on a resource like
AirNav.
THere is apparently a way to get the frequencies displayed in a separate
window, independent of FSX, but I haven’t messed with this as of yet. I
believe Jordan can speak to this ability more fully.
Good luck,
Zack.
On Jan 26, 2017, at 9:28 AM, daniel wolak <danielwolak97@xxxxxxxxxxx> wrote:Blind and Visually impaired Pilots mailinglist
Hi all,
I'm attempting to use the demo version of PF3 with FSX, and am running
into a slight snag:
I load a flight plan, and recieve an error that the first waypoint is
too close, which I hit okay on.
Only problem is that the keystroke 0 doesn't seem to do anything when I
connect to FS, and at first it seems that there is something in the way
as when I try to un-pause fsx I hear a ding, as if the window isn't
focused correctly.
Also, is there a way with nvda to see the messages that PF3 puts out
I.E. for tuning radios etc?
I'm hitting 0 after connecting, is that the thing I should do?
I also have the copilot set to mode 2...
Thanks for any help.
Daniel
X§uĐÝV+.jYrjZ·>)hķÉX§XŽķm§ĸðÃëyébēÛ(ŪåËnøĐZ-ą:)ĒËZë,jĒØ^+-ąéÝjgŽąĻ ķïĨĒÛ įĨËlĒļĒéėđŧ Ū&ÞąéÝjgŽąĻ ķïĨĒÛ+zŦēŨëyébēÛ(Ū§vķ°Ē·nËąĘâmč§ķŽđļÞrÚ ĘŦë,j
Ēš-
ęčĶØĻË.rŽv( ēÛ ÖĶzËëhnøĐZ-ē·Šđë-~·+-ēājwišÛa{
+vĨĶ)í
ë.n7ķōĒęæzË
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the subject
of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your
message.
