Hi, Robert. Thanks much. Will do.--Matt.
On 4/3/2017 2:30 PM, Robert Cezar wrote:
BTW Matthew...
I have attached 3 files:
C172SP-IFR-KSEA-KBLI-STARTUP.FLT
C172SP-IFR-KSEA-KBLI-STARTUP.WX
IFR Seattle-Tacoma Intl to Bellingham Intl.PLN
Place these files in the folder where you normally save your FSX flights... typically:
C:\Users\[YOURNAME]\Documents\Flight Simulator X - Steam Edition Files
Then, using the ALT plus F (as in flight), followed by L (as in load a flight), select the flight listed as:
C172SP-IFR-KSEA-KBLI-STARTUP
NOTE: Before pressing Fly Now or ENTER, press the TAB key twice to get to a an option box entitled:
Make this the default flight
Place a CHECK in this box with the SPACEBAR, then press the F key to Fly Now!
On subsequent startups, FSX will come up with the C172SP Skyhawk, sitting cold and dark at a parking area at the Seattle, WA (KSEA) airport, with an IFR flight to Bellingham, WA (KBLI) loaded and ready to go. You can then select a different flight from that point using the same procedures as described above.
I hope this helps.
r
On Mon, Apr 3, 2017 at 11:03 AM, Robert Cezar <robert@xxxxxxxxxxxxxxx <mailto:robert@xxxxxxxxxxxxxxx>> wrote:
Hi,
Rather than pressing ESC, try pressing ALT plus F (as in flight),
then press L (as in load a flight), then selected a previously
saved flight.
CAUTION: DO NOT SELECT THE ENTRY ENTITLED: Previous Flight
r
On Mon, Apr 3, 2017 at 9:56 AM, Matthew Chao <mattchao@xxxxxxxxxxx
<mailto:mattchao@xxxxxxxxxxx>> wrote:
I seem to have run into a problem. When I open FSX, I get to
this ultralight flight. I hit Escape to end the flight, and
then I get into the Learning Center. I know the free flight
and missions buttons are on the screen, but I can't seem to
navigate to them. Also, the alt-combo keys don't work. How
do I fix these things? Thanks in advance.--Matthew Chao
Hi, Folks.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
<//www.freelists.org/list/bvipilots>
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx <mailto:bvipilots@xxxxxxxxxxxxx>
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word help
in the subject of your message.
