This file will work with all aircraft as far as I have been able to tell.
Since I use FSX's flightplanner, I can set the position of the aircraft to an
active runway or to a gate or ramp position.
Jordan
-----Original Message-----
From: bvipilots-bounce@xxxxxxxxxxxxx [mailto:bvipilots-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Tyler Kavanaugh
Sent: Thursday, March 30, 2017 5:26 PM
To: bvipilots@xxxxxxxxxxxxx
Subject: [bvipilots] Re: Two Questions/Problems
Sure, I'll take it. Will this file also work for custom, add-on aircraft? Or
would I need to modify it to handle that? Also, where will the aircraft be
positioned if I use this file...at the gate, or at the runway? Because it
seems, and I have no way to verify this, that when I start a flight with a
flight plan loaded, the aircraft is positioned on the runway.
On 3/30/2017 5:17 PM, Jordan Gallacher wrote:
I have a cold and dark file that would replace the default file for Free
Flights in FSX. It will have all aircraft already be at the cold and dark
state with 0 fuel in the tanks. Let me know if you want it.
Jordan
-----Original Message-----
From: bvipilots-bounce@xxxxxxxxxxxxx
[mailto:bvipilots-bounce@xxxxxxxxxxxxx] On Behalf Of Tyler Kavanaugh
Sent: Thursday, March 30, 2017 5:11 PM
To: bvipilots@xxxxxxxxxxxxx
Subject: [bvipilots] Two Questions/Problems
Hi guys,
So, it's me again...with two problems this time.
Problem 1:
In preparation for flying online on VATSIM, I started to pay more attention
to the way I load a flight plan and a flight. What I've noticed is that
SimBrief, which I like to use for generating my FSX flight plans, has a
tendency to want to start the aircraft at a given runway, not at a gate or
ramp. In addition, when I create a brand new flight, for some reason the
thing is loaded with the engines on and the aircraft moving...definitely not
something I want when trying to prepare to fly online! I decided to try
setting up the "Location" section of the free flight window with the airport
and gate, rather than the airport and the default of "Active Runway," but it
still didn't do quite what I wanted. What would you all suggest I do to keep
from starting with the aircraft moving and the engines on?
Problem 2:
Zack mentioned this "Live ATC" mode that is available in IYP that is used
when flying online. However, I can't find any info about it on the website
(the section just reads "***Under Construction***"), nor can I get the IYP
window to focus properly to change the active ATC mode from Simple ATC Plus
to the other mode. I'm using JAWS and Windows 10. Thoughts?
Thanks in advance for your help.
-Tyler
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to bvipilots@xxxxxxxxxxxxx To
unsubscribe, send a message to bvipilots-request@xxxxxxxxxxxxx and put the
word unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your
message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the subject
of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your
message.