Hi Josh, this might sound strange but make sure you delete everything from the
Box 1st, for example if there is something there hit delete until you hear
blank. When I try to enter an altitude sometimes even if there is just a space
left in the box it doesn't work when I enter it and press enter
Sent from my iPhone
On 14 Jul 2017, at 07:11, Joshua Tubbs <orin8722@xxxxxxxxx> wrote:Blind and Visually impaired Pilots mailinglist
Do you know if there's a way to have FSXP stop at the appropriate time
so that FSE could detect that we're landed and complete the flight?
Right now, it immediately lands, puts reverse thrust and breaks on,
but FSE didn't come up with the message that my assignments were
delivered.
If I disable the stop on runway option in general options, will it
just stop when it's supposed to, or is this something FSXP
unfortunately can't do for us?
On 7/13/17, Zachary Kline <zkline@xxxxxxxxxxxxx> wrote:Blind and Visually impaired Pilots mailinglist
Hi Orin,
There’s a button you need to press on the autopilot panel to actually set
COM1, I think. It was labeled “COM1,” if I recall. I don’t know about the
console command.
Best,
Zack.
On Jul 13, 2017, at 7:40 PM, Joshua Tubbs <orin8722@xxxxxxxxx> wrote:
Hi all,
Would anyone who uses FSX Pilot to set Com1 have an idea why, despite
going to the com1 field and inputting a value in it and pressing
enter, it doesn't set?
I'm not sure if there's a command to set it in the console. I know to
set the transponder it's "set transponder <squalk>, but there doesn't
appear to be a command for that to set Com1. Furthermore, I can type
"set altitude <feet> and it'll set the altitude. However, when I shift
tab from the console, I see my altitude number there, but when I say
input another value in and hit enter, it doesn't set. Is sapi supposed
to say the new value when inputted? I know it does when I set it in
the console.
The com1 command I found in the manual was rather confusing, it was
something like set com [com1] <frequency>. However, I think that's
specifically for the explicit use in TXT flightplan files.
Any help on this would be greatly appreciated.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the
subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of
your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the subject
of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your
message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the subject
of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your
message.
