For some reason that was not put in the user guide.
From: bvipilots-bounce@xxxxxxxxxxxxx [mailto:bvipilots-bounce@xxxxxxxxxxxxx]
On Behalf Of Ron Kolesar
Sent: Tuesday, June 20, 2017 8:10 AM
Subject: [bvipilots] Re: Non Towered Airports with PF3
This is a huge help.
Many Thanks Jordan.
From: Jordan Gallacher
Sent: Monday, June 19, 2017 11:29 PM
Subject: [bvipilots] Non Towered Airports with PF3
If anyone is wondering how to do Non Towered airports with PF3, here is how
to do it.
Tune to Unicom and press 7 to get the weather
Tune to the FSS frequency and press 0
Wait until FSS says go ahead and possibly the co-pilot will take it from
there to open your IFR flight plan
Once you have gotten to the runway and are ready to taxi onto the runway,
hit 6 to announce your take off.
After Take off, press 8 to announce that you are leaving the area.
Tune to the Departure frequency and hit 0, and you will be all set
Once Approach tells you to Squalk 1200, if your co-pilot does not
automatically do it, press 8 to report runway in sight
Tune to the Unicom or multicom and press 0 to announce your position
Press 2 to announce on down wind
Use 3 to announce on base
Use 4 to announce on final
If you are doing a straight in or ILS approach, skip keys two and three
5 will announce clear of the runway if your co-pilot does not do that for
Hope this can help someone