On the climb out, I did try to set the airspeed and climb rate manually after
they had decreased but the airspeed still stays stuck at around 70 kn and as
soon as I set the climb rate to anything mear 1000 feet it decreases a lot
Sent from my iPhone
On 14 Aug 2017, at 13:30, Joshua Tubbs <orin8722@xxxxxxxxx> wrote:Blind and Visually impaired Pilots mailinglist
You can set the climb and speed manually.
On Aug 13, 2017, at 6:57 PM, Declan Webster <declan.webster44@xxxxxxxxx>
wrote:
Hi. I've been having a problem with FSX pilot and the default Mooney bravo.
Once we have taken off and the gear is up, the climb rate is set to 1000
ft./m, but it slowly decreases to around 300 ft./m. The airspeed also seems
to be stuck at around 70 knots. The aircraft should be able to climb faster
and fly faster than this, any ideasBlind and Visually impaired Pilots
mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the subject
of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your
message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the subject
of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your
message.
