I think it is a bigger problem than that since I was poking around the PF3
forum, and someone posted a similar issue, and I have seen at least three more
instances where the frequency is completely wrong. For example Monroe Approach
is 126.9 not 123.6, which is what PF3 is using, and FSX has it correct as 126.9
if I recall correctly. I could be wrong about that though. I am planning to
completely update my database and see what happens in the next day or so, and
hopefully that will solve some issues.
Jordan
From: bvipilots-bounce@xxxxxxxxxxxxx [mailto:bvipilots-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Zachary Kline
Sent: Thursday, February 2, 2017 11:11 PM
To: bvipilots@xxxxxxxxxxxxx
Subject: [bvipilots] Re: Just found one problem with PF3
Jordan,
PF3 is getting the frequencies directly from the sim, as far as I’m aware. Is
it possible you were getting ATIS from the ActiveSky audio add-on? THat plays
at various frequencies in the 122.xx range. THe solution is simple enough, just
turn off ASN’s audio features.
Best,
Zack.
On Feb 2, 2017, at 9:08 PM, Jordan Gallacher <jordanandseptember@xxxxxxxxx>
wrote:
I just did a flight from Ruston Regional, KRSN, to Slidell, KASD, and the
departure was fine. The approach and landing was a bit wrong though. ATIS
should not have been on the FS frequency, which KASD does not have by the way.
De Ridder FSS is the flight service station, which is the same for Ruston if I
recall correctly, and Unicom for KASD is 122.8. I have to wonder if PF3 is
using old data for the radio frequencies because they did not match at all for
Monroe Departure or Approach, and the same went for a couple other airports I
have flown to and from in the past week. Untowered airport might not be
something I do with PF3 depending on if I can fix the frequency issues or not.
Jordan