So pardon, but what the fuck is going on? There appears to be no
reason for this. I followed instructions.
On 3/26/17, Robert Cezar <robert@xxxxxxxxxxxxxxx> wrote:
Hi,Blind and Visually impaired Pilots mailinglist
Unless I am mistakened, the binary FSX Steam Edition file is supposed to be
installed in the folder:
C:\Program Files (x86)\Steam\steamapps\common\FSX\
In Jody's case, it's installed under (and I am going by memory)...
C:\Program Files (x86)\DoveTail Games\blah, blah, blah...
In addition, when saving a Flight Plan and a Flight from within FSX, it
appears as though the files are being saved under a different user name.
Basically, it looks nothing like a normal FSX Steam installation. However,
Zack, if you can walk Jody through the steps necessary to resolve these
issues, I would very much appreciate it. You seem to know a lot more than I
on this subject matter.... I'm merely an old programmers who deals with
bits and bytes! (smiles)
r
On Sun, Mar 26, 2017 at 6:43 PM, Zachary Kline <zkline@xxxxxxxxxxxxx>
wrote:
Robert and all,
May I ask if this is definitely an FSX Steam issue? I know that the IYP
instructions seem to presume that FSX SE is installed _alongside_
original
FSX. If it isn’t, the folder structure looks a lot more like original
FSX,
and consequently folders might not be where you would expect.
What exactly was missing?
Best,
Zack.
On Mar 26, 2017, at 3:35 PM, Robert Cezar <robert@xxxxxxxxxxxxxxx> wrote:
Hi,
Well, there's something amiss with the FSX Steam installation. The
installation process did not create files and folders in the correct
places.
I would highly recommend that you completely unistall and re-install the
Steam Edition using all of th default settings.
BTW..... WARNING: You are dangerously close to running out of disc space!
Only about 3GB left on your C drive,
r
On Sun, Mar 26, 2017 at 2:37 PM, Jody McKinniss <jlove42010@xxxxxxxxx>
wrote:
Team Viewer now installed. Not view on La Plata sure how to let you
connect.
On 3/26/17, Jody McKinniss <jlove42010@xxxxxxxxx> wrote:
I do, yes. My password Is: z747bh. Under "control re mote computerFSUIPC
it is: 709 968 935.
On 3/26/17, Robert Cezar <robert@xxxxxxxxxxxxxxx> wrote:
Do you have Teamviewer installed?
r
On Sun, Mar 26, 2017 at 12:12 AM, Jody McKinniss
<jlove42010@xxxxxxxxx
wrote:
Same issue. All folders shared. FSUIPC 4.96. Loaded flight plan
with Cesna Skyhawk. Then loaded IYP. "Your simulator is
running,...
no aircraft detected." Not sure what else to try. I never had this
issue with my other PC. Also, I noticed that when trying to load a
flight plan, it says no flights found.
On 3/26/17, Jody McKinniss <jlove42010@xxxxxxxxx> wrote:
Running FSUIPC 4.96. I loaded a flight plan. I will tru once
more.
On 3/25/17, Robert Cezar <robert@xxxxxxxxxxxxxxx> wrote:
In addition, ensure that you are running the latest version of
tothat
supports the FSX Steam edition.
http://www.schiratti.com/dowson.html
r
On Sat, Mar 25, 2017 at 5:13 PM, Robert Cezar
<robert@xxxxxxxxxxxxxxx>
wrote:
Jody,
It's not supposed to be a frustrating experience. It's intended
thatbe
an
adventure.
To convert your current frustration into an adventure, requires
asyou
do precisely what Tyler set forth. Go here:
http://itsyourplane.com/html/manuals.asp
Download the IYP Flight Deck Doc and read the first section
entitled:
How to Properly Load a Flight Plan and a Flight
Have fun!
r
On Sat, Mar 25, 2017 at 4:54 PM, Joshua Tubbs
<orin8722@xxxxxxxxx
wrote:
I've found that you don't need to do that with the demo. As
long
loadthe Skyhawk is at an airport parked on a runway or whereever,
IYP
should load fine. It'll say that "no flight plan file has been
loaded", but that can easily be fixed by loading one from the
flights
Load option.
On 3/25/17, Tyler Kavanaugh <twkav@xxxxxxxxx> wrote:
Did you follow the directions in the IYP Flight Deck Doc to
everythinga
flight plan and a flight?
On 3/25/2017 6:34 PM, Jody McKinniss wrote:
Ok, Robert, now I am getting very frustrated. I did
thethat
it says. I got IYP installed, along with FSUIPC. I shared
innofolders as instructed to the everyone group and allowed full
control.
I am running steam edition, with SimConnect build 62615,
which
currently is the latest version. I am running Windows 8.1
professional, processor is 3.2 GHZ, quad core, 16 GB ram.
Problem:
IYP loadsafter I load simulator with Cesna Skyhawk, but says
that
plane is detected. Running FSUIPC. What is the problem?
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe
inthe
subjectsubject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the
of
your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe
thesubjectthesubject
of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the
of your
message.Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in
ofofsubject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the
subject
Blind and Visually impaired Pilots mailinglistyour message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the
subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject
Blind and Visually impaired Pilots mailinglistyour message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the
subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of
your message.