[bvipilots] Re: Flights with multiple legs and IYP

  • From: "Jordan Gallacher" <jordanandseptember@xxxxxxxxx>
  • To: <bvipilots@xxxxxxxxxxxxx>
  • Date: Tue, 24 Jan 2017 21:55:50 -0600

All of them are going up on YouTube.  The first leg is up on YouTube at  
https://www.youtube.com/watch?v=c-iv8Pnt-PA if you are interested.

Jordan

 

From: bvipilots-bounce@xxxxxxxxxxxxx [mailto:bvipilots-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Sarah Alawami
Sent: Tuesday, January 24, 2017 8:23 PM
To: blind pilots discussion list
Subject: [bvipilots] Re: Flights with multiple legs and IYP

 

Nice nice, good luck with that.  Can't wait ti hear how it went.

On Jan 24, 2017, at 4:58 PM, Jordan Gallacher <jordanandseptember@xxxxxxxxx> 
wrote:

 

Right now I am currently getting ready to get back to work on my cross country 
flight with a total of about 5 stop overs before getting to Florida.  So, what 
I ended up doing is I have all the flight plans saved, and all I have to do is 
load the flight plan and the aircraft, and then save it as a flight.  Then 
after I load the flight, I am ready to go.

Jordan

 

From: bvipilots-bounce@xxxxxxxxxxxxx [mailto:bvipilots-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Sarah Alawami
Sent: Tuesday, January 24, 2017 3:08 PM
To: blind pilots discussion list
Subject: [bvipilots] Re: Flights with multiple legs and IYP

 

I still say it's a good idea, and a good challenge, go for it. This will give 
us more practice, and that's what we want. I would love the challenge 
personally considering the project I'm working on for the next few years.

 

Take care all.

On Jan 23, 2017, at 4:56 PM, Joshua Tubbs < <mailto:orin8722@xxxxxxxxx
orin8722@xxxxxxxxx> wrote:

 

Since I know what this project is, I'd say to scrap it. Creating the
Eurofly missions in Flight Sim would be extremely tedious. If you want
a better experience than EuroFly's missions, try Fly Around the World.
No, it doesn't have layovers like Eurofly, but it does have more
flights that are already created for you.


On 1/23/17, Sarah Alawami < <mailto:marrie12@xxxxxxxxx> marrie12@xxxxxxxxx> 
wrote:




Don't worry about it. All of this will be gotten with practice.  I'm not too
worried, We'll get the hang of all of this. Thanks much, and let's hope my
friend can get this project done in about 3 months with out too much hassle.
I'm excited.




On Jan 23, 2017, at 11:07 AM, Robert Cezar < <mailto:robert@xxxxxxxxxxxxxxx
robert@xxxxxxxxxxxxxxx>
wrote:

Hello,

If there's a flight from KLAX (Los Angeles) to KMIA (Miami) with a stop at
KDFW (Dallas / Ft. Worth) with the same aircraft, the IYP system treats
this as a Continuing Flight as follows (e.g.):

KLAX to KDFW Flight Number 124
KDFW to KMIA Flight Number 124

If there's a flight from KLAX (Los Angeles) to KMIA (Miami) with a return
flight from KMIA (Miami) to KLAX (Los Angeles) with the same aircraft, the
IYP system treats this as a Turn-Around Flight as follows (e.g.):

KLAX to KMIA Flight Number 124
KMIA to KLAX  Flight Number 123

Each of the foregoing are individual flights and the procedures for
setting up these flights is set forth in detail on PAGE 34 of the IYP
Flight Deck Doc under the heading entitled:

Turn-Arounds and Continuing Flights

This is how flights are constructed and conducted in the real world.

NOTE: Eastbound and northbound flights are traditionally assigned even
numbers, while westbound and southbound flights have odd numbers.

Regrettably, and despite all of the confusion, I cannot make this any
clearer.

I hope this helps.

r


On Sun, Jan 22, 2017 at 6:22 PM, Sarah Alawami < <mailto:marrie12@xxxxxxxxx
marrie12@xxxxxxxxx
< <mailto:marrie12@xxxxxxxxxmailto:marrie12@xxxxxxxxx>> wrote:
No big. It might have ben my fault as well for not getting it as well. I
guess when this person does their project they  will have to number their
flights 1-1 and 1-2 etc if that flight has 4 or 5 places. Correct? I'm
just makign sure I understand this correctly.

Take care and have a blessed Sunday.





On Jan 22, 2017, at 4:43 PM, Robert Cezar < <mailto:robert@xxxxxxxxxxxxxxx
robert@xxxxxxxxxxxxxxx
< <mailto:robert@xxxxxxxxxxxxxxxmailto:robert@xxxxxxxxxxxxxxx>> wrote:

I apologize for the manual deficiency.

r

On Sun, Jan 22, 2017 at 2:58 PM, Sarah Alawami < <mailto:marrie12@xxxxxxxxx
marrie12@xxxxxxxxx
< <mailto:marrie12@xxxxxxxxxmailto:marrie12@xxxxxxxxx>> wrote:
Yeah, thought not. That to me is not real world, but oh well, guess I
can't have my cake and eat it too.

Take care all.





On Jan 22, 2017, at 1:46 PM, Zachary Kline < <mailto:zkline@xxxxxxxxxxxxx
zkline@xxxxxxxxxxxxx
< <mailto:zkline@xxxxxxxxxxxxxmailto:zkline@xxxxxxxxxxxxx>> wrote:

Sarah,

Layovers aren’t simiulated in the sim. You’re probably honestly better
off just doing separate flight plans to get  that effect.




On Jan 22, 2017, at 1:23 PM, Sarah Alawami < <mailto:marrie12@xxxxxxxxx
marrie12@xxxxxxxxx
< <mailto:marrie12@xxxxxxxxxmailto:marrie12@xxxxxxxxx>> wrote:

Ok, so what if I did go from vegas to dfw to the airport in monreau.
That is in theory 1 flight with a layover in dfw. Would I in practice
have to file a flight plan for vegas to dfw, then from dfw to monreau?
I'm also asking on behaof of someone who is putting together a project
that involvs if they have to make separate flights as some do have
layovers over 300 flight plans.

Thanks.




On Jan 22, 2017, at 12:01 PM, Robert Cezar < <mailto:robert@xxxxxxxxxxxxxxx
robert@xxxxxxxxxxxxxxx
< <mailto:robert@xxxxxxxxxxxxxxxmailto:robert@xxxxxxxxxxxxxxx>> wrote:

Hi,

IYP has been designed so as to emulate the real world of flying
wherever and however possible.

In the real world, every leg of a trip has it own complete route.
i.e., origination to destination.

Joshua,

REGARDING: I've read somewhere in the IYP manual that it is possible,
but have no idea how it can be done.

For information regarding Turn-Arounds and Continuing Flights, refer
to PAGE 34 of the IYP Flight Deck Doc Users' manual.

r



On Sun, Jan 22, 2017 at 10:11 AM, Zachary Kline < <mailto:zkline@xxxxxxxxxxxxx
zkline@xxxxxxxxxxxxx
< <mailto:zkline@xxxxxxxxxxxxxmailto:zkline@xxxxxxxxxxxxx>> wrote:
No, the simulator considers a flight plan to just have one origin and
one destination. To be fair, I think that the idea of just having
multiple plans for each leg is entirely reasonable, and doesn't need
any kind of fancy tricks.

Sent from my iPhone





On Jan 22, 2017, at 10:10 AM, Sarah Alawami < <mailto:marrie12@xxxxxxxxx
marrie12@xxxxxxxxx
< <mailto:marrie12@xxxxxxxxxmailto:marrie12@xxxxxxxxx>> wrote:

In the flight plan dialogue there is not way to "add" an air port to
your thing? As dn't most pilots have multiple stops anyway like from
dfw to nashvill to monrau?

Take care.




On Jan 21, 2017, at 11:50 PM, Zachary Kline < <mailto:zkline@xxxxxxxxxxxxx
zkline@xxxxxxxxxxxxx
< <mailto:zkline@xxxxxxxxxxxxxmailto:zkline@xxxxxxxxxxxxx>> wrote:

Orin,

THere are a few commands which can help with this.

If you bring up the GPS, you can say “Mike, let’s go direct to
airport <airport code>,” which can fly you directly from where you
are to where ever the airport is. If you’re under ATC control you
might want to get permission for this first. :) THe destination
airport command does a bit more than set the ACARS data. I think it
might also be useful for this problem.

One thing though, your FSE flights don’t all have to be flown at
the same time, even if they’re multi legged. The client just tracks
when you land and take off, and you can handle each “leg,”
separately, pretty easily.

This is just a few thoughts, I’ll probably have something more
coherent later. HOpefully others will have more ideas too.
Good luck,
Zack.




On Jan 21, 2017, at 11:27 PM, Joshua Tubbs < <mailto:orin8722@xxxxxxxxx
orin8722@xxxxxxxxx
< <mailto:orin8722@xxxxxxxxxmailto:orin8722@xxxxxxxxx>> wrote:

Hi all,

So I've recently got into FSEconomy, and they basically say the
best
way to max your chances of earning a lot of money is to do
multileg
flights.

I've read somewhere in the IYP manual that it is possible, but
have no
idea how it can be done. Basically, I remember reading having to
cheat
the simulator so you tricked it into thinking the new destination
is
the final one, in flightplan terms. I thought it was as simple as
saying "Make the destination Airport "X", but that's only for
Acars,
and I don't know if that command will accept alternate airports
other
than the planned final destination. It would suck to have to
create
flightplans for each leg. What I thought I could do, was make the
start and end destinations as a flightplan, and then change the
destination after landing at each part of the leg with the "make
destination" command, and continue to the next leg.
I wish it was as simple as the FSE documentation says it is for
most
people... simply deviate from the plan and land somewhere else.
IYP
doesn't deviate from the plan though, which is fine. unless there
is
flight planning software that can create the routes and IYP will
change the route destination accordingly from a new departure
airport?
Blind and Visually impaired Pilots mailinglist
 <//www.freelists.org/list/bvipilots
//www.freelists.org/list/bvipilots
< <//www.freelists.org/list/bvipilots
//www.freelists.org/list/bvipilots>
To post a message to the list, send a message to
 <mailto:bvipilots@xxxxxxxxxxxxx> bvipilots@xxxxxxxxxxxxx < 
<mailto:bvipilots@xxxxxxxxxxxxxmailto:bvipilots@xxxxxxxxxxxxx>
To unsubscribe, send a message to
 <mailto:bvipilots-request@xxxxxxxxxxxxx> bvipilots-request@xxxxxxxxxxxxx
< <mailto:bvipilots-request@xxxxxxxxxxxxx
mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
 <mailto:bvipilots-request@xxxxxxxxxxxxx> bvipilots-request@xxxxxxxxxxxxx
< <mailto:bvipilots-request@xxxxxxxxxxxxx
mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word help in
the subject of your message.


Blind and Visually impaired Pilots mailinglist
 <//www.freelists.org/list/bvipilots
//www.freelists.org/list/bvipilots
< <//www.freelists.org/list/bvipilots
//www.freelists.org/list/bvipilots>
To post a message to the list, send a message to
 <mailto:bvipilots@xxxxxxxxxxxxx> bvipilots@xxxxxxxxxxxxx < 
<mailto:bvipilots@xxxxxxxxxxxxxmailto:bvipilots@xxxxxxxxxxxxx>
To unsubscribe, send a message to
 <mailto:bvipilots-request@xxxxxxxxxxxxx> bvipilots-request@xxxxxxxxxxxxx
< <mailto:bvipilots-request@xxxxxxxxxxxxx
mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
 <mailto:bvipilots-request@xxxxxxxxxxxxx> bvipilots-request@xxxxxxxxxxxxx
< <mailto:bvipilots-request@xxxxxxxxxxxxx
mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word help in
the subject of your message.


Blind and Visually impaired Pilots mailinglist
 <//www.freelists.org/list/bvipilots
//www.freelists.org/list/bvipilots
< <//www.freelists.org/list/bvipilots
//www.freelists.org/list/bvipilots>
To post a message to the list, send a message to
 <mailto:bvipilots@xxxxxxxxxxxxx> bvipilots@xxxxxxxxxxxxx < 
<mailto:bvipilots@xxxxxxxxxxxxxmailto:bvipilots@xxxxxxxxxxxxx>
To unsubscribe, send a message to
 <mailto:bvipilots-request@xxxxxxxxxxxxx> bvipilots-request@xxxxxxxxxxxxx
< <mailto:bvipilots-request@xxxxxxxxxxxxx
mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
 <mailto:bvipilots-request@xxxxxxxxxxxxx> bvipilots-request@xxxxxxxxxxxxx
< <mailto:bvipilots-request@xxxxxxxxxxxxx
mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word help in
the subject of your message.


Blind and Visually impaired Pilots mailinglist
 <//www.freelists.org/list/bvipilots
//www.freelists.org/list/bvipilots
< <//www.freelists.org/list/bvipilots
//www.freelists.org/list/bvipilots>
To post a message to the list, send a message to
 <mailto:bvipilots@xxxxxxxxxxxxx> bvipilots@xxxxxxxxxxxxx < 
<mailto:bvipilots@xxxxxxxxxxxxxmailto:bvipilots@xxxxxxxxxxxxx>
To unsubscribe, send a message to
 <mailto:bvipilots-request@xxxxxxxxxxxxx> bvipilots-request@xxxxxxxxxxxxx
< <mailto:bvipilots-request@xxxxxxxxxxxxx
mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word unsubscribe
in the subject of your message.
For other options such as digest, send a message to
 <mailto:bvipilots-request@xxxxxxxxxxxxx> bvipilots-request@xxxxxxxxxxxxx
< <mailto:bvipilots-request@xxxxxxxxxxxxx
mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word help in the
subject of your message.

 

 

 

 

 

Blind and Visually impaired Pilots mailinglist
 <//www.freelists.org/list/bvipilots
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
 <mailto:bvipilots@xxxxxxxxxxxxx> bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
 <mailto:bvipilots-request@xxxxxxxxxxxxx> bvipilots-request@xxxxxxxxxxxxx and 
put the word unsubscribe in the subject of your message.
For other options such as digest, send a message to
 <mailto:bvipilots-request@xxxxxxxxxxxxx> bvipilots-request@xxxxxxxxxxxxx and 
put the word help in the subject of your message.

 

Other related posts: