Hey I am free after 3 tomorrow.
-Nick
On Nov 13, 2005, at 6:15 PM, John Ottander wrote:
Luke went crazy and bought us an almost complete plumbing system
that will cost us much less than it would have cost us if we bought
it ourselves. So we probably don't need to order any plumbing. Go
to here details,
http://burt.schtuff.com/lukeplumbing
I am going to send out the HTPB and Carbon Black orders tomorrow.
We also need to get started on the machining.
John
P.S. When are you guys available tomorrow. I was going to try to go
to the machine shop. If people are too busy we could do it on Friday.
johnio@xxxxxx wrote:
Luke knows of a used rocket parts store in CA that he will go to on
Saturday. He said he would try to look for used parts that would fit
in our design that may be more inexpensive than what we could get
from McMaster. So I'll mail you guys when he gets back to me.
John
P.S. Eddie, we are looking at 1-1.5 lbm/s flow rate. And around a
7s-15s burn. So 20lb is just a conservative estimate. Maybe a 10lb is
more appropriate but 20lb is not outlandish. I think we picked 20lb
just to be conservative.
BU Rocket Team Mailing List
Homepage: http://burt.schtuff.com/
To unsubscribe from this list: send an email to burt-all-
request@xxxxxxxxxxxxx with unsubscribe in the Subject.
Freelists.org Faq: //www.freelists.org/wiki/the_faq
BU Rocket Team Mailing List
Homepage: http://burt.schtuff.com/
To unsubscribe from this list: send an email to burt-all-
request@xxxxxxxxxxxxx with unsubscribe in the Subject.
Freelists.org Faq: //www.freelists.org/wiki/the_faq
BU Rocket Team Mailing List
Homepage: http://burt.schtuff.com/
To unsubscribe from this list: send an email to
burt-all-request@xxxxxxxxxxxxx with unsubscribe in the Subject.
Freelists.org Faq: //www.freelists.org/wiki/the_faq
