[bulug] Re: Static IP Issues in Debian
- From: "james bardin" <jbardin@xxxxxx>
- To: bulug-list@xxxxxxxxxxxxx
- Date: Mon, 8 Dec 2008 16:30:00 -0500
Hi Justin,
Are you still having an issue with this?
On Fri, Dec 5, 2008 at 3:49 PM, Justin Williamson <plato@xxxxxx> wrote:
> I'm not sure where I'm going wrong, but I do note the distinct lack of
> the RUNNING flag on ifconfig eth0. The weird thing is that I AM
> receiving traffic over eth0, just no sending... I've googled
> furiously, but I don't seem to find anything useful, so I turn to you,
> O LUG; any thoughts?
I think the lack of RUNNING may an issue. This can happen when there's
a problem bringing up the network hardware. I would swap out what you
can [card, cable, switch], and see if it makes a difference.
You can get more connection info from the interface with
# ethtool eth0
This could also be a driver issue. Are eth0 and eth1 the same chipset?
-jim
--
James Bardin <jbardin@xxxxxx>
Systems Analyst / Administrator
Boston University
_________
BU LUG: http://lug.bu.edu. To unsubscribe, email
bulug-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field.
Other related posts:
