[brailleblaster] Re: Does the VP Tiger Do Double-Sided embossing?

  • From: Alex Jurgensen Jurgensen <asquared21@xxxxxxxxx>
  • To: "brailleblaster@xxxxxxxxxxxxx" <brailleblaster@xxxxxxxxxxxxx>
  • Date: Tue, 13 Dec 2011 09:54:18 -0800

Hi, so the pages need to be turned over to the other side? There's no automatic 
double-sided in Boston? Just double checking to make sure I understand this 
correctly! Thanks again for all your help. Regards, Alex,

Sent from my iPhone

This message was sent from my iPhone. Therefore, it has most likely been 
dictated via Siri. Forgive me for any errors! :-)

On 2011-12-13, at 7:24 AM, "John Gardner" <john.gardner@xxxxxxxxxxxx> wrote:

> Yes the Cub and Cub Jr can do double sided embossing, but unfortunately not
> in legacy mode.  Well not unless you have a way to separate out the even and
> odd pages and emboss them separately.  In the full graphics Windows printer
> driver, this can be done automatically.
> One does turn the pages over to do the second side.  The vertical dot
> alignment is done automatically, but one may need to make a tiny adjustment
> in the tractor positions to get proper horizontal dot alignment.  Even if
> you don't do that however, the interpoint is fine, because the dots fit
> between other dots.
> John G
> -----Original Message-----
> From: brailleblaster-bounce@xxxxxxxxxxxxx
> [mailto:brailleblaster-bounce@xxxxxxxxxxxxx] On Behalf Of Michael Whapples
> Sent: Tuesday, December 13, 2011 12:32 AM
> To: brailleblaster@xxxxxxxxxxxxx
> Subject: [brailleblaster] Re: Does the VP Tiger Do Double-Sided embossing?
> I have a tiger cub jr and it can only do single side and I believe the
> standard cub is the same.
> Well that certainly is the case for it doing it automatically, however I
> don't know if it would support double sided embossing via the technique of
> printing the odd numbered pages first and then requesting you feed the
> output back in other side up and then prints the even pages on the back.
> While it may work for standard printers, I don't know if embossers could
> support it as you would need to ensure the dots don't land on top of dots on
> the other side.
> Michael Whapples
> On 13 Dec 2011, at 07:25, Alex Jurgensen wrote:
>> Hi All,
>> For anyone with a VP Tiger Cub, does it do double-sided Braille?
>> Regards,
>> Alex,

Other related posts: