I agree with having springs in the battery compartment. Nancy ----- Original Message ----- From: Anthony To: bookport@xxxxxxxxxxxxx Sent: Thursday, August 31, 2006 5:45 AM Subject: [bookport] suggestions I have managed to send a daisy title to the book port. The transfer software seems to convert the daisy title in to a single file and then send the file to the cf card in the book port. If all the conversion process is done with the transfer software and the bookport is only acting as a card reader since it seems to be usb 1 and not usb 2 why can't we have an option in the book port transfer to allow me to put the card in my usb 2 card reader and send the information to the cf card at usb 2 speeds instead of usb 1. All we would require in the software would be a check box to say send the output to drive x instead of the book port. Also can we have a minimize option so we can do something else while the software is transfering the data. If they made the belt clip removeable they could have made a small external speaker that clipped on to where the belt clip had been. It could be done with out any wires if the clip on mechanism was designed properly so it made contact as part of the attachment process. I am not saying the quality in a small speaker would be great but there are times when it would be of use. I whish the battery compartment had springs at the - end instead of the type of connectors they use at the moment. I do not think these bent pieces of metal will last as long as springs and haveing different connectors would assist users to tell the correct battery orientation. The ear buds have no tactile markings to let the user right from left. What do other people think? Anthony