And what else is nice about Sandy's suggestion is that the bookport will remember the point in each file where you left off. Of course, if you want to go back to the beginning of the file, simply hold down the 1 key and you are there. And, as you read, you can set your own bookmarks in each file if you wish. Neal -----Original Message----- From: bookport-bounce@xxxxxxxxxxxxx [mailto:bookport-bounce@xxxxxxxxxxxxx] On Behalf Of Sandy Licht Sent: Monday, January 23, 2006 3:00 PM To: bookport@xxxxxxxxxxxxx Subject: [bookport] Re: premarking Why not just transfer all 30 text files to your bookport. Put them in their own folder before the transfer. This way, you can navigate easily from one file to another. At 02:21 PM 1/23/2006, you wrote: >Hello >My boss wants a few employees to read a book or manual of some kind >which >is in 30 separate txt files. I will leave the copies on the floppy alone, >but also plan to use Kurzweil's append feature to compile the files all >into one file on my hard drive. This will then be used to send to a few of >our Book Ports. Before that though, I was curious if there was something I >could type in, using any program, that will have the Book Ports understand >as a kind of premade bookmark? Even a section marker of some kind would >be good. I know in the book port transfer documentation you can move >through it easily with one four and three six, but apparently that isn't >created by something as simple as a few carriage returns because if I do >that the command doesn't work after the transfer. >Thanks for the help. > >Tiffany Jessen Sandy Licht Phone: 409-898-8218 Jeremiah 29:11 - 14A 11For I know the plans I have for you," says the LORD. "They are plans for good and not for disaster, to give you a future and a hope. 12In those days when you pray, I will listen. 13If you look for me in earnest, you will find me when you seek me. 14I will be found by you," says the LORD...