Okay, further research has turned this up. You still don't want the NCC.html file, but there is a file that should give you what you want. For example, in the FSReader Demo folder in JAWS 6.0, I find a file named fsreader_daisy_reader.htm and this is what you want. Look for other .htm files in whatever training materials you download, but not NCC.html. -----Original Message----- From: bookport-bounce@xxxxxxxxxxxxx [mailto:bookport-bounce@xxxxxxxxxxxxx] On Behalf Of Walt Smith Sent: Wednesday, February 09, 2005 4:20 PM To: 'bookport@xxxxxxxxxxxxx' Subject: [bookport] Re: jaws training in daisy As I said, the FS books aren't fully produced in HTML at this time. There are various combinations of HTML and audio possible whenever you produce a DAISY book and at this time, those FS provides are not the fully synchronized audio and text format. -----Original Message----- From: bookport-bounce@xxxxxxxxxxxxx [mailto:bookport-bounce@xxxxxxxxxxxxx] On Behalf Of Barrett, Don Sent: Wednesday, February 09, 2005 4:23 PM To: bookport@xxxxxxxxxxxxx Subject: [bookport] Re: jaws training in daisy But the mp3 file won't give me the daisy navigation which is what I = want. -----Original Message----- From: bookport-bounce@xxxxxxxxxxxxx [mailto:bookport-bounce@xxxxxxxxxxxxx]On Behalf Of Walt Smith Sent: Wednesday, February 09, 2005 4:13 PM To: 'bookport@xxxxxxxxxxxxx' Subject: [bookport] Re: jaws training in daisy The NCC.html file is not what he wants. What he needs is the MP3 file. = The FS materials are produced in full only in audio and the HTML is only the book title and section headings. =20 -----Original Message----- From: bookport-bounce@xxxxxxxxxxxxx = [mailto:bookport-bounce@xxxxxxxxxxxxx] On Behalf Of PAMELA RADER Sent: Wednesday, February 09, 2005 4:08 PM To: bookport@xxxxxxxxxxxxx Subject: [bookport] Re: jaws training in daisy Don: See if there is an "Ncc" file; that is what you need for that = format.=3D20 >>> Don.Barrett@xxxxxx 02/09/05 04:02PM >>> The folks from Freedom Scientific say that one can read their training = =3D3D materials which are in DAISY II format with any reader. With DAISY III, = =3D =3D3D all one needs to do is send the .opf file to the book port and the Book = =3D =3D3D Wizzard constructs the whole shebang from that one action. What about = =3D3D daisy II files, for which I can find no .opf file/ What do we send to = =3D3D the book port so the Wizzard will step in and put everything we need on = =3D =3D3D the bp? Thanks. Don