[bookport] Re: disabling the bookport launcher from startup

  • From: "Gary Wunder" <gwunder@xxxxxxxxxxxxx>
  • To: <bookport@xxxxxxxxxxxxx>
  • Date: Tue, 27 Dec 2005 13:29:17 -0600

In the computer's startup process, it looks to firmware settings
before it reads in the Windows Operating system. If you can see
the screen, it will give you a key combination to press to edit
these options. You can't use a screen reader to do any of this
work because your screen reading software sees only what Windows
knows about, and at this point in the boot process, there is no
Windows Operating System.

Gary


----- Original Message ----- 
From: "Tyler Wood" <tcwood12@xxxxxxx>
To: <bookport@xxxxxxxxxxxxx>
Sent: Tuesday, December 27, 2005 1:09 PM
Subject: [bookport] Re: disabling the bookport launcher from
startup


Where do you do this?

just curious,
Tyler
----- Original Message ----- 
From: "Gary Wunder" <gwunder@xxxxxxxxxxxxx>
To: <bookport@xxxxxxxxxxxxx>
Sent: Tuesday, December 27, 2005 9:15 AM
Subject: [bookport] Re: disabling the bookport launcher from
startup


>I have always thought this was a bios issue - you can tell your
> computer where to look as it gets ready to boot so that, in the
> event of a hard disk failure, you can look somewhere else for a
> system. In my case, I foolishly set that option to look at my
CD
> and my USB, and so, with some USB disk units, I have to
> disconnect them.
>
>
> ----- Original Message ----- 
> From: "Walt Smith" <walt@xxxxxxxxxx>
> To: <bookport@xxxxxxxxxxxxx>
> Sent: Saturday, December 24, 2005 1:48 AM
> Subject: [bookport] Re: disabling the bookport launcher from
> startup
>
>
> My experience with many USB devices causing XP not to boot
> properly has more
> to do with the devices' level of USB. By and large, if I have a
> USB 1.1
> device connected (my USB 1.1 hub, for example), XP won't boot.
>
> ----- Original Message ----- 
> From: "David Bennett" <david382@xxxxxxxxxxxxxx>
> To: <bookport@xxxxxxxxxxxxx>
> Sent: Saturday, December 24, 2005 1:20 AM
> Subject: [bookport] Re: disabling the bookport launcher from
> startup
>
>
> No, Windows XP is funny about stuff like that.  My card reader
> can prevent
> Windows from starting if I fail to disconnect it before
rebooting
> my
> computer.  This is a common problem.
>
> ----- Original Message ----- 
> From: "Chris Hill" <chill000@xxxxxxxxxxxxxx>
> To: <bookport@xxxxxxxxxxxxx>
> Sent: Friday, December 23, 2005 8:45 PM
> Subject: [bookport] Re: disabling the bookport launcher from
> startup
>
>
>>I don't know about your question, but your computer not
starting
> is
>> likely a problem with your usb ports.  The second part may
well
> have
>> to do with the bookport.
>>
>> On Fri, 23 Dec 2005 20:09:55 -0600, you wrote:
>>
>>>Hi all,
>>>
>>>I have a feeling that when bookport launcher is activated and
I
> connect my
>>>mp3 player, nothing happens. Heres what happens:
>>>
>>>1. The computer is powered off, and I connect my mp3 player.
>>>2. I turn the computer on. I end up having to unplug the
player
> in order
>>>for windows to start.
>>>3. When windows starts and I plug the player in again, I did
an
>>>experement: I opened bookport transfer. Nothing happens.
>>>4. I disconnect the player. I here the usual sound that means
> the bookport
>>>is not connected.
>>>5. I connect the player again: and close the transfer
software.
> It stil
>>>won't come up as a removable disk (my mp3 player, I mean).
>>>6. When I disconnect and connect the player again, it will
come
> up as a
>>>removable disk, like normal. I am wondering, would the
transfer
> software
>>>somehow associate my player with the bookport?
>>>
>>>just curious, and thanks.
>>>Tyler
>>
>>
>>
>>
>
>
>
>
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.371 / Virus Database: 267.14.7/214 - Release Date:
23/12/2005
>
>



Other related posts: