[bookport] Re: chkdsk
- From: Clarence Whaley <clarence@xxxxxxxxxxx>
- To: bookport@xxxxxxxxxxxxx
- Date: Sat, 26 Feb 2005 15:23:43 -0600
Good catch Amy. It should be drive letter : such as chkdsk
x: Sorry. Typing too fast.
At 04:21 PM 2/26/2005 -0500, you wrote:
>Hi,
>When I type in chkdsk f I get a path is wrong or no such file exists error.
>amy
>At 04:10 PM 2/26/2005, you wrote:
> >Amy, I use it all the time. What isn't working for you?
> >
> >
> >At 04:05 PM 2/26/2005 -0500, you wrote:
> > >Hi,
> > >This sequence does not work in XP.
> > >At 03:54 PM 2/26/2005, you wrote:
> > > >Albert, assuming you know the drive letter that your BookPort sees go to
> > > >the dos prompt by doing start, run and then typing cmd. At the dos
> prompt
> > > >type chkdsk "x" where X is the letter of the drive which is your
> > > >BookPort. If it finds problems do the same chkdsk "x" again and add /f
> > > >which will fix the errors.
> > > >
> > > >
> > > >
> > > >At 11:58 AM 2/26/2005 -0500, you wrote:
> > > > >I must have missed the directions on running chkdsk on the flash card.
> > > > >Someone take pity on my poor soul and repost. thanks
> > > >
> > > >
> > > >Clarence Whaley
> > > >Training Division Manager
> > > >GW Micro
> > > >E-Mail: Clarence@xxxxxxxxxxx
> > > >Direct Voice (615) 383-6248
> > > >or 866-699-8901
> > > >Direct Fax (260) 489-2608
> > > >GW Micro Voice Number 260-489-3671
> > > >http://www.gwmicro.com
> > > >or press enter below to read all about our training program
> > > >http://www.gwmicro.com/training
> >
> >
> >Clarence Whaley
> >Training Division Manager
> >GW Micro
> >E-Mail: Clarence@xxxxxxxxxxx
> >Direct Voice (615) 383-6248
> >or 866-699-8901
> >Direct Fax (260) 489-2608
> >GW Micro Voice Number 260-489-3671
> >http://www.gwmicro.com
> >or press enter below to read all about our training program
> >http://www.gwmicro.com/training
Clarence Whaley
Training Division Manager
GW Micro
E-Mail: Clarence@xxxxxxxxxxx
Direct Voice (615) 383-6248
or 866-699-8901
Direct Fax (260) 489-2608
GW Micro Voice Number 260-489-3671
http://www.gwmicro.com
or press enter below to read all about our training program
http://www.gwmicro.com/training
Other related posts:
