Thanks, Scott, that's what I get for writing without checking first. = <Grin> Sorry about the confusion. -----Original Message----- From: bookport-bounce@xxxxxxxxxxxxx [mailto:bookport-bounce@xxxxxxxxxxxxx]On Behalf Of Scott Duck Sent: Monday, March 21, 2005 10:22 AM To: bookport@xxxxxxxxxxxxx Subject: [bookport] Re: bookport Re: Strange Behavior Sarah, The 7+8+9 find command is in the manual that came with my BP so I = wouldn't think that it is just part of the beta. Thanks, Scott ----- Original Message -----=20 From: "Sarah Cranston" <cranston.sarah@xxxxxxxxxxxxxxxxx> To: <bookport@xxxxxxxxxxxxx> Sent: Monday, March 21, 2005 9:38 AM Subject: [bookport] Re: Strange Behavior > Scott, > You can't access the new find command, 7+8+9, because, I believe, it = is =3D > part of the new beta. > As for your second question, try creating a folder with the Transfer = =3D > Tool. (I'd call it "bible" or something like that.) Then transfer = your =3D > text file into that folder and see if it works. > > HTH > > Sarah > > -----Original Message----- > From: bookport-bounce@xxxxxxxxxxxxx > [mailto:bookport-bounce@xxxxxxxxxxxxx]On Behalf Of Scott Duck > Sent: Monday, March 21, 2005 9:29 AM > To: Book Port Discuss > Subject: [bookport] Strange Behavior > > > Hi Everyone, > Over the weekend, I noticed a couple of strange things about my BP. = =3D > When I try to enter text to find by pressing 7+8+9, nothing happens. = I =3D > can use 7+9 to mark the beginning and end of a string of text to find = =3D > and it works fine. Also, I have a King James Bible, stored in a text = =3D > file that is a little more than 4MB. I transferred the file to the BP = =3D > and, on the BP, the file stops before it should, in Revelation 4. = This =3D > is probably about 96 or 97% of the file. I transferred the file again = =3D > and got the exact same result. Does anyone know what could be causing = =3D > the problems? I am running version 1.6.0.0 of the transfer software = and =3D > my BP firmware version is 01.02.00. The software tells me that there = =3D > are no updates for the transfer software or the BP firmware. > Thanks, > Scott > > >