The latest firmware is 1.1.0 Test 8. >>> clarence@xxxxxxxxxxx 07/12/04 09:16AM >>> Rob, is the latest firmware 8:? At 09:03 AM 7/12/2004 -0400, you wrote: >Kurt: > >You can download the latest beta version of the software at: > >www.aph.org/beta/bp_beta.exe=3D20=20 > >You can download the latest beta version of the firmware (required for = the =3D >software above) at: > >www.aph.org/beta/bpfw_beta.exe=3D20=20 > >We do not have an exact date for the official release. Let's just say =3D >soon. > >Speeding up audio while sending is a bit slow, depending on several =3D >factors. The good news is that it is usually worth it for two reasons: >1. The resulting file is smaller on the device, leaving room for more =3D >stuff. >2. You don't have to read at normal speed. > >A side bennifit is that the actual file transfer happens quicker because = =3D >the file is smaller. So, there is kind of a give and take going on. Those = =3D >who feel that the entire transfer is too slow might consider using just = =3D >one of the two compression options. For example, if you skip pause =3D >compression, the transfer will go a bit faster. > >Rob Meredith > > >>> blsmass@xxxxxxxx 07/12/04 08:40AM >>> >Does anybody know where: =3D20 >A. I can get the new beta software and firmware and=3D20 >B. How long it will be (approximatly before the real version comes =3D >out.=3D20 >Also, it appears that the transfer tool will speed up your audio but is >very slow. What part of the program enables this. I have been reading >from double to triple speed for years and would like to know. One last >question. Is there a place you can go and look at posts that have not >been sent in digest? I like the digest, but would like to go up and look >at the posts for replies. Thanks for all. Kurt=3D20 Clarence Whaley Training Division Manager GW Micro E-Mail: Clarence@xxxxxxxxxxx=20 Direct Voice (615) 383-6248 or 866-699-8901 Direct Fax (260) 489-2608 GW Micro Voice Number 260-489-3671 http://www.gwmicro.com=20 or press enter below to read all about our training program http://www.gwmicro.com/training =20