[bookport] Re: Problem in newest firmware
- From: "Sarah Cranston" <cranston.sarah@xxxxxxxxxxxxxxxxx>
- To: <bookport@xxxxxxxxxxxxx>
- Date: Fri, 29 Jul 2005 08:32:31 -0500
Do you have a lot of files in that particular folder? Sometimes the BP gets
very sluggish if there are too many files in a folder.
-----Original Message-----
From: bookport-bounce@xxxxxxxxxxxxx
[mailto:bookport-bounce@xxxxxxxxxxxxx]On Behalf Of Rich Cavallaro
Sent: Friday, July 29, 2005 8:30 AM
To: bookport@xxxxxxxxxxxxx
Subject: [bookport] Re: Problem in newest firmware
Yes. I have also noticed that while moving from html file to html file it
takes book port a few seconds until it reports the name of the file. How
ever a reset with 2 and b fixes the problem for a bit but then it comes back
again.
----- Original Message -----
From: "LARRY SKUTCHAN" <lskutchan@xxxxxxx>
To: <bookport@xxxxxxxxxxxxx>
Sent: Friday, July 29, 2005 8:00 AM
Subject: [bookport] Re: Problem in newest firmware
> Is this suluggishness just while you are in an html file?
>
> >>> richcav@xxxxxxxxxxx Friday, July 29, 2005 7:54:11 AM >>>
> I have seen a weird problem in the lateest firmware as well. Keep in
> mind
> this does not happen all the time. I tseems to be when i am dealing
> with
> html files. Book port is verry slugish when moving around from
> sentence to
> sentence or even when locking the unit. It takes quite a few seconds
> (about
> 2) before it says locked or unlocked
> ----- Original Message -----
> From: "Eric Pridmore" <jpridmore@xxxxxxxxxxx>
> To: <bookport@xxxxxxxxxxxxx>
> Sent: Thursday, July 28, 2005 4:23 PM
> Subject: [bookport] Re: Problem in newest firmware
>
>
> > I often use text files but I've not experienced this problem of
> backing up
> > to a previous spot. I've had my BP since April 2004. Do you think
> this
> is
> > a bug in the new firmware? software? or perhaps something else?
> >
> > By the way, I'm new to this list. This is my first post.
> >
> > Eric
> >
> > ----- Original Message -----
> > From: "Gary Wunder" <gwunder@xxxxxxxxxxxxx>
> > To: <bookport@xxxxxxxxxxxxx>
> > Sent: Thursday, July 28, 2005 2:48 PM
> > Subject: [bookport] Re: Problem in newest firmware
> >
> >
> > > Hi Walt. It may be, but I've always used text files and my
> > > experience has been that the unit has tracked very very well. Not
> > > sure how to explain it - maybe a lack of awareness on my part.
> > >
> > >
> > > ----- Original Message -----
> > > From: "Walt Smith" <WSmith@xxxxxxxxxxxxxxxxxxxxx>
> > > To: <bookport@xxxxxxxxxxxxx>
> > > Sent: Thursday, July 28, 2005 1:51 PM
> > > Subject: [bookport] Re: Problem in newest firmware
> > >
> > >
> > > This has happened for me, especially with .txt files, ever since
> > > I
> > > bought my device. I consider it to be normal behavior.
> > >
> > > -----Original Message-----
> > > From: bookport-bounce@xxxxxxxxxxxxx
> > > [mailto:bookport-bounce@xxxxxxxxxxxxx] On Behalf Of Gary Wunder
> > > Sent: Thursday, July 28, 2005 2:34 PM
> > > To: Bookport
> > > Subject: [bookport] Problem in newest firmware
> > >
> > > I am noticing that when I stop the BP while reading, it
> > > frequently resumes reading several sentences prior to where I was
> > > when stop was pressed. I can navigate by sentence to get back to
> > > where I was so it is not that the BP isn't recognizing sentences.
> > > The same can be observed when the sleep timer stops reading and I
> > > press the read key - it is frequently several sentences behind
> > > where it has just finished reading.
> > >
> > > Gary
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> --------------------------------------------------------------------------
> --------------
> > This e-mail was checked by the TecInfo Content Scanning Service
> > for potentially harmful content, such as viruses or Spam
> > For more information, call 800.863.5415 or visit www.tecinfo.net
> >
> --------------------------------------------------------------------------
> ---------------------------
> >
>
>
>
Other related posts:
