[bookport] Re: Need the link to:
- From: Robert Carter <r-carter@xxxxxxx>
- To: bookport@xxxxxxxxxxxxx
- Date: Thu, 02 Jun 2005 15:15:50 -0500
Hi All,
I could not replicate Clarence's problem. Thanks for the ability to delete
folders. That is very nice. It is also nice to have the folder names spoken
properly.
Robert Carter
At 03:04 PM 6/2/2005, you wrote:
>Yes, it is definitely there. Larry, the only issue with installing
>the beta was that when connected the focus stayed on the transfer
>software, and I had to alt-tab to get to the Yes, no, detail
>option. Could just have been a windows thing. <smile>
>
>
>
>At 03:59 PM 6/2/2005 -0400, you wrote:
> >I just looked, too, and it is there.
> >
> >When you connect, check for updates, then press the Details button.
> >The direct uri is www.aph.org/beta/bpf_new.htm
> >
> >
> >
> > >>> WSmith@xxxxxxxxxxxxxxxxxxxxx Thursday, June 02, 2005 3:52:48 PM
> > >>>
> >I just looked and there's nothing there yet regarding the new beta.
> >The
> >last information is the rundown of last month's major release.=20
> >
> >-----Original Message-----
> >From: bookport-bounce@xxxxxxxxxxxxx
> >[mailto:bookport-bounce@xxxxxxxxxxxxx] On Behalf Of Sandy Licht
> >Sent: Thursday, June 02, 2005 3:50 PM
> >To: bookport@xxxxxxxxxxxxx
> >Subject: [bookport] Need the link to:
> >
> >The details page for the new beta firmware.
> >
> >Thanks!
> >
> >
> >
> >Sandy Licht
> >Phone: 409-898-8218
> >Jeremiah 29:11 - 14A
> >11For I know the plans I have for you," says the LORD. "They
> >are plans for good and not for disaster, to give you a future and a
> >hope.=20
> >12In those days when you pray, I will listen. 13If you look for me in
> >earnest,
> >you will find me when you seek me. 14I will be found by you," says
> >the=20
> >LORD... =20
>
>
>Clarence Whaley
>Training Division Manager
>GW Micro
>E-Mail: Clarence@xxxxxxxxxxx
>Direct Voice (615) 383-6248
>or 866-699-8901
>Direct Fax (260) 489-2608
>GW Micro Voice Number 260-489-3671
>http://www.gwmicro.com
>or press enter below to read all about our training program
>http://www.gwmicro.com/training
Other related posts:
