That is not the way it is supposed to work, but I'm not sure that ever worked correctly either. >>> buhrow@xxxxxxxxxxxxxxxxxxxxx Tuesday, February 28, 2006 9:20:19 PM >>> hello. I've just taken the plunge and installed Beta V2.1.0.28. Previously, I was running Release 2.1.0. I've been playing with some text files with section markers in them, and I notice one thing that seems a bit strange. The section markers these texts contain are the ones utilizing the 1+4 keys for backing up to the previus section and the 3+6 keys to move to the next section. If I jump to a section of text, using the 3+6 keys, and read, and I read beyond the subsequent section boundary, the next time I press the 3+6 keys to move to the beginning of the next section, rather than moving me to the beginning of the section following the section I'm currently reading, the Bookport moves me to the beginning of the section following the section I previously jumped to. Let me illustrate with an example. Suppose I have text containing sections 1, 2, 3, 4 and 5. After I begin reading, at the beginning, I press the 3+6 keys to jump to the beginning of section 2. Now, I read continuously, eventually passing through section 2 and into section 3. At some point in section 3 I decide that I'm done with that portion of the text, and I press 3+6 to go to what I think should be the beginning of section 4. Instead, Bookport moves me to the beginning of section 3. Pressing 3+6 again moves me to section 4 as expected, but I'm surprised it doesn't just move me to the beginning of the next section relative to my current reading cursor. I'm sure the 2.1 code would have jumped me to section 4 in this scenario, and I can reload the 2.1 firmware if people want me to verify that, but I'm wondering if this is a deliberate design change, or a consequence of other changes. -thanks -Brian