Hi, It says: Version 01.02.00 ----- Original Message ----- From: "LARRY SKUTCHAN" <lskutchan@xxxxxxx> To: <bookport@xxxxxxxxxxxxx> Sent: Wednesday, October 20, 2004 6:17 PM Subject: [bookport] Re: Braille again > James: > > Which version of the firmware are you using? If you press a+c, the unit = > will say the number, or you can hit reset (2+b) and it will say something > = > like Book Port 1.2 ready. > > >>>> james.jolley1@xxxxxxxxxxxxxx Wednesday, October 20, 2004 1:05:26 PM = >>>> > Hi, > > Still no joy. > > Madness isn't it > > -James- > ----- Original Message -----=20 > From: "Walt Smith" <walt@xxxxxxxxxx> > To: <bookport@xxxxxxxxxxxxx> > Sent: Wednesday, October 20, 2004 5:41 PM > Subject: [bookport] Re: Braille again > > >> Or, to translate directly to the Book Port key names (remember that the = > BP >> should be turned so that the CompactFlash card is nearest to you), to=20 >> press >> an F CHORD: >> >> Left Shift =3D The F key >> Dot 1 =3D the star (*) key >> Dot 2 =3D the A key >> Dot 4 =3D the 7 key >> >> Press all four keys simultaneously. Remember...these are all the Book = > Port >> key names to the right of the equals sign. >> >> And I sure hope I got these right! <g> >> >> ----- Original Message -----=20 >> From: "LARRY SKUTCHAN" <lskutchan@xxxxxxx> >> To: <bookport@xxxxxxxxxxxxx> >> Sent: Wednesday, October 20, 2004 12:26 PM >> Subject: [bookport] Re: Braille again >> >> >> It is left shift+ dots 124 (f). >> >> >>>>> james.jolley1@xxxxxxxxxxxxxx Wednesday, October 20, 2004 12:19:26 PM = > =3D >>>>> >> Hi Folks, >> Still can't get the braille input side of searching to work. could =3D >> someone off list just give me the exact keys I should press for an f =3D >> chord, i've tried all sorts and gotten no ware. >> >> Best >> >> -James- >> >> >> >> >> >>=20 > > > > > >