Melissa: On the screen where you're notified of an update, you should have three buttons: "Yes", "No", and "Details." The Details button tells you what you'll get before you do the update. If the update has already been downloaded, you can find a "What's New file" in the Book Port submenu, under Programs in the Start Menu. >>> melissatucker4@xxxxxxxxxxxxxx 02/22/05 04:59AM >>> How long does it usually take for a beta to be a complete firmware upgrade? Is there somewhere to go to see the what's new with out downloading the upgrade? ----- Original Message ----- From: "LARRY SKUTCHAN" <lskutchan@xxxxxxx> To: <bookport@xxxxxxxxxxxxx> Sent: Monday, February 21, 2005 3:25 PM Subject: [bookport] Beta 13 Firmware > We have just placed a new beta of the firmware on the site. > > Please read carefully: > > Do not use the firmware update if you are using rechargable batteries. > > Before you check for updates, insure that your battery level is at > least 90%. > > Insure that you have done chkdsk to check the integrety of your flash > card. > > If you have problems with loose battery contacts, do not update the > firmware. > > While it is criticle for us to test the process of updating firmware, > if your machine has been acting funny, do not try this update until we > have more information about what is causing failures during the update > process. > > We do not provide telephone support for betas. If something happens to > your machine during the firmware update, recognize that you will have to > communicate via email to resolve the problem. > > To try this update, connect your Book Port. > > When Book Port Transfer comes up, go to Options/Advanced, and press the > Check for Firmware Update button. > > Press the Details button to read about the features and fixes. > > Close the browser after reading about what is new. > > Press the "Yes" button to download and install the update. > > Disconnect your unit and listen for the messages. > >