This is really creepy. I wonder what's going on. ----- Original Message ----- From: "Joseph Norton" <joenorton1@xxxxxxxxxxx> To: <bookport@xxxxxxxxxxxxx> Sent: Thursday, March 31, 2005 4:02 PM Subject: [bookport] Battery draining issue > Well, I downgraded to 1.20.20 and the behavior of the BP as to the > electromagnetic emissions from the unit when it is in standby is now the > same as before the battery draining issue was reported. Now, the unit, > when in standby is emitting the rythmic buzzing noises as reported earlier > with stable firmware. I really think there's something to this. See my > earlier message below for details. > > > On Wed, 30 Mar 2005, Joseph Norton wrote: > >> Hi APH staff and listers: >> >> Well, all this talk about battery drainage made me think of an experiment >> which has yielded helpful data in the past and may even now. >> >> I decided to get out my trusty telephone pick-up coil which I normally >> have >> stuck on the back of my computer to clue me in to what my computer may be >> doing behind my back. I got it out and placed it onto my Bookport and >> noticed a difference in the electromagnetic noise generated by the >> Bookport >> when it's supposed to be asleep. With the latest firmware, all I hear is >> a >> kind-of hiss when the Bookport is supposed to be powered off--the same >> noise >> is also heard when plugged into the USB connection except when files are >> being transfered which generates some noise also. Anyway, I got to >> wondering >> if this was the same noise heard with the stable 1.20 firmware when the >> unit >> is powered off. So, I reverted back to 1.20 and noticed there was a >> change >> in the interference when the Bookport is supposed to be asleep. With >> 1.20, >> the noise picked up by my pick-up coil is a kind-of buzzing sound which >> varies in pitch from slightly higher to lower every half-second. Kind-of >> like a siren, but, much lower. I went back to 1.20.22 and found that >> with >> 1.20.22 beta, the buzzing noise is gone--there's just a soft hissing >> noise >> when the unit is asleep. This sounds much quieter than the noise I got >> from >> 1.20 stable, but, it does seem to be different behavior, for whatever >> that's >> worth. >> >> You all may think I'm nuts, but, that pick-up coil has clued me into a >> lot of >> things over the years, so I am tossing my observations out there. >> >> Hope this helps. >> >