Try putting several 1+ mb text files in the same folder -----Original Message----- From: bookcourier-bounce@xxxxxxxxxxxxx [mailto:bookcourier-bounce@xxxxxxxxxxxxx] On Behalf Of Steve Nutt Sent: Monday, March 07, 2005 4:40 PM To: bookcourier@xxxxxxxxxxxxx Subject: [bookcourier] Re: problem with sluggish performance Hi Kevin, I have to say, I have never seen this problem, and I have quite a few large files in a single folder, since I encode MP3 files at 192K. All the best -- Computer Room Services: the long cane for blind computer users. Telephone Voice: +44(0)1438 742286, Fax/BBS: +44(0)1438 759589 mobile: +44(0)7956 334938, Email: Steve@xxxxxxxxxxxxxx Web site: http://www.comproom.co.uk -----Original Message----- From: bookcourier-bounce@xxxxxxxxxxxxx [mailto:bookcourier-bounce@xxxxxxxxxxxxx]On Behalf Of Kevin Jones Sent: 06 March 2005 14:40 To: bookcourier@xxxxxxxxxxxxx Subject: [bookcourier] Re: problem with sluggish performance I have also found that just putting more than 3 or 4 large files in a single folder make the book courier sluggish. -----Original Message----- From: bookcourier-bounce@xxxxxxxxxxxxx [mailto:bookcourier-bounce@xxxxxxxxxxxxx]On Behalf Of Mike Kilburn Sent: Sunday, March 06, 2005 7:21 AM To: Book Courier List Serve Subject: [bookcourier] problem with sluggish performance Content-type: text/plain; charset=iso-8859-1 Content-transfer-encoding: 7BIT Hi all: I've had my BC for little over a year. It's updated. I use metal re-chargeable batteries which seem to work fine. I load most of my files into the BC using documents scanned into Kurzweil 1000. Much of the time, I've found that using the text format, versus the KES format, to be better for BC navigation in terms of word and sentence navigation. With certain files, seemingly those originating as Microsoft Word Documents imported into Kurzweil, and then transferred to the book courier as text files, these documents invariably end up being very sluggish in terms of navigation. For example, after pushing the read key, there will be 2 or 3 second delay before reading begins. Likewise, with the other navigation keys the same thing occurs. I've changed batteries to alkalines to determine if this corrected the problem but no change resulted. Can anyone advise on this problem as to it's cause and possible solution? Thanks, Mike -- No attachments (even text) are allowed -- -- Type: text/plain -- Desc: "AVG certification"