Gary and Petro,
Our registration system depends on the system clock being accurate. If the
system time and date are too far out of sync with reality, the software might
switch to demo/trial mode. In demo/trial mode, most media and conversions will
be limited in length.
Other than that, changing the time would have no affect on conversions. If you
provide specifics on what you are recording (url, times, and conversion
settings) I can test it. Alternately, you can export your schedule data, and I
can load that file for testing.
Jeffrey Wilson
Applian Technologies, Inc.
jwilson@xxxxxxxxxxx<mailto:jwilson@xxxxxxxxxxx>
On Apr 9, 2015, at 11:08 PM, Petro Giannakopoulos
<petrogia@xxxxxxxxx<mailto:petrogia@xxxxxxxxx>> wrote:
Hi
I am sure Dr. Wilson will respond soon to this as I have no clue. Not sure if
its because you change your system time causing the conversion issues. Double
check each of your shows saved settings near the bottom of the scheduler screen
and see if you hear the 'no conversion settings'. It's two shift+tabs from the
ok button. Are you using the global conversion setting? If you are see what is
its settings.
----- Original Message -----
From: Gary Petraccaro<mailto:garypet130@xxxxxxxxx>
To: blindreplay@xxxxxxxxxxxxx<mailto:blindreplay@xxxxxxxxxxxxx>
Sent: Thursday, April 09, 2015 9:41 PM
Subject: [blindreplay] Time Problems
Ever since I changed the system time, and the show start and lengths of my
shows, Replay has stopped converting FLV files. Happens on all shows.
________________________________
[http://static.avast.com/emails/avast-mail-stamp.png] <http://www.avast.com/>
This email has been checked for viruses by Avast antivirus software.
www.avast.com<http://www.avast.com/>
