[blindreplay] Re: Set Max Stream Length In Replay Media Catcher 5

  • From: "Petro Giannakopoulos" <petrogia@xxxxxxxxx>
  • To: <blindreplay@xxxxxxxxxxxxx>
  • Date: Thu, 10 Jul 2014 14:08:54 -0400

I can test your webcasts if needed. Send the URL address and what you want 
Thank you.

----- Original Message -----
From: Jeffrey Wilson
To: blindreplay@xxxxxxxxxxxxx
Sent: Thursday, July 10, 2014 1:42 PM
Subject: [blindreplay] Re: Set Max Stream Length In Replay Media Catcher 5

Hi Rob and Petro,

Petro is correct in that you will probably want to turn on the “Record Silence” 
setting.  Alternately, you can adjust the two next settings.
From the User Guide:
  a.. Silence: Is a value between 1 and 255. Sound values at or below this 
number will be considered silence
  b.. Silence Time: The number of milliseconds that sound values should be 
below the Silence value for silence to be detected

So, to record things that are very quite, you would want to decrease the 
Silence value.  In your case, Rob, you might want to increase the Silence Time 
value instead.

Now, the above advice is for if you are doing an audio recording as opposed to 
“Download from the Internet”.  When in “Download from the Internet” mode, all 
that matters is the constant flow of network data, and even “silence” will 
include data (ones and zeroes).  Remember that “Download from the Internet” 
saves network data coming to your computer which just happens to include an 
audio component.  On the other hand, “Record Audio” mode will only record what 
you hear.  There is a technical difference.

Jeffrey Wilson
Applian Technologies, Inc.

From: Petro Giannakopoulos
Sent: ‎Thursday‎, ‎July‎ ‎10‎, ‎2014 ‎1‎:‎05‎ ‎PM
To: blindreplay@xxxxxxxxxxxxx

Press enter on Library on main UI.
press alt+l for library menu
Choose settings.
Press your right arrow key until you land on the Audio tab.
Press enter keyboard on Audio tab. JAWS will say Checked. The audio tab is now 
Press your tab key a few times until you hear this checkbox that reads Record 
silence. Press spacebar to check this box. We are telling RMC 5 to record the 
silence or possibly the low volume.
There are some other items on this audio screen but I do not know what they 
are. Values like
Silence: 5
Silence time: 255
Dr. Wilson what are the above and in seconds or milliseconds. Hope you can 

  ----- Original Message -----
  From: Rob
  To: blindreplay@xxxxxxxxxxxxx
  Sent: Thursday, July 10, 2014 11:58 AM
  Subject: [blindreplay] Set Max Stream Length In Replay Media Catcher 5

  I tried unsuccessfully to submit this question to tech support on the Applian 
web site.  I couldn't get past the requirement to pick a product.

  I am trying to download some webcasts that have some significant periods of 
very low volume when transitioning from one segment to another and especially 
for a 10 - 15 minute intermission in the middle.  What can I do to keep Replay 
Media Catcher from stopping the download too soon?

  While I am here, I have another question.  I had set RMC to convert the 
captured .FLV file to .MPG format after downloading.  I cannot figure out how 
to set RMC back to no conversion.  "none" does not appear in the conversion 
formats list.

  Thanks for your help.

  Rob Armstrong

This email is free from viruses and malware because avast! Antivirus protection 
is active.

Other related posts: