[blindreplay] Re: Replay Radio 9.01.46 & Setting Your Split Recording Value

  • From: "Petro T. Giannakopoulos" <petrogia@xxxxxxxxx>
  • To: <blindreplay@xxxxxxxxxxxxx>
  • Date: Sat, 3 May 2014 22:39:23 -0400

Dr. Wilson
Fantastic and very valuable information! Thank you very much!

  ----- Original Message ----- 
  From: Jeffrey Wilson 
  To: blindreplay@xxxxxxxxxxxxx 
  Sent: Saturday, May 03, 2014 7:58 PM
  Subject: [blindreplay] Re: Replay Radio 9.01.46 & Setting Your Split 
Recording Value


  Petro,
  Thanks for the feedback. In your example, you can accomplish the same thing 
by using the 'minutes after the hour' split option with a value of zero. This 
will create a split at the top of every hour. This might be preferable. Here 
comes a technical explanation.


  The 'split every X minutes' option can introduce a little bit of drift, so 
after 10 splits you might notice the recordings starting starting late. This is 
because the recording stops at the given number of minutes, and restarting the 
connection takes a small bit of time. Those reconnection delays can eventually 
add up. Meanwhile, the 'minutes after the hour' spilt option makes sure the 
split occurs at a specific time.


  Regards,

  Jeffrey Wilson
  Applian Technologies, Inc.

  On May 3, 2014, at 2:19 PM, "Petro T. Giannakopoulos" <petrogia@xxxxxxxxx> 
wrote:


    It is working fine using JAWS 15 and NVDA 2014.1 when it comes to setting 
your split value via the scheduler's advanced tab for your show / radio 
station. Tested this here.

Other related posts: