You should verify that apply correction automatically, and repair end of line hyphens are enabled in settings/general. Make sure you save these settings in all your settings files. G. Guido Dante Corona IBM Accessibility Center, Austin Tx. Research Division, Phone: 512. 838. 9735. Email: guidoc@xxxxxxxxxxx Web: http://www.ibm.com/able "Paula and James Muysenberg" <outofsightlife@xxxxxxxxxxx> Sent by: bksvol-discuss-bounce@xxxxxxxxxxxxx 03/04/2005 07:52 AM Please respond to bksvol-discuss To <bksvol-discuss@xxxxxxxxxxxxx> cc Subject [bksvol-discuss] Re: word hypenated between lines Is it also necessary to enable Apply Corrections with documents we scan in K1k, or does the program do that automatically? Paula ----- Original Message ----- From: Guido Corona To: bksvol-discuss@xxxxxxxxxxxxx Sent: Friday, March 04, 2005 7:25 AM Subject: [bksvol-discuss] Re: word hypenated between lines Yes Elizabeth, with Kurzweil you should be able to get mostwords repaired automatically. First you need to ensure that the automatic end of line hyphen correction is enabled in settings/general. Then once enabled, save in all your settings files. Now go to tools/apply corrections and press enter. Automatic corrections will be applied to the entire document, including end of line repair for words split by end-of-line soft-hyphens. After this operation you will discover that there are very few words split at end of line. You will still need to look for hypen followed by space, because the repair mechanism is not yet 100% perfect. Guido Guido Dante Corona IBM Accessibility Center, Austin Tx. Research Division, Phone: 512. 838. 9735. Email: guidoc@xxxxxxxxxxx Web: http://www.ibm.com/able "E." <thoth93@xxxxxxxxxxxxx> Sent by: bksvol-discuss-bounce@xxxxxxxxxxxxx 03/04/2005 06:47 AM Please respond to bksvol-discuss To bksvol-discuss@xxxxxxxxxxxxx cc Subject [bksvol-discuss] word hypenated between lines I am validating a book where a lot of words are split up with hyphens from one line to another. Is there some way to put the word together on one line with hyphen? I want a command within k1000 so I do not have to go through the book and do each one by hand. E.