[bksvol-discuss] Re: scanner red light
- From: Pam Quinn <quinns@xxxxxxxxxxxxx>
- To: bksvol-discuss@xxxxxxxxxxxxx
- Date: Fri, 24 Sep 2004 09:43:54 -0500
Thanks, guys. That took care of it.
Pam
On Thu, 23 Sep 2004 21:17:47 -0500, you wrote:
>Pam, Natasha is correct. My Epson 1660 manual says that a red light means
>that "the scanner may
>not be properly connected to the computer. Unplug the scanner from its power
>source, remove the
>USB cable, and then plug them back in. If this does not eliminate the error,
>one of the following may
>be the problem and you need to consult your dealer or Epson:" (1) The
>fluorescent lamp needs to be
>replaced, or (2) The scanner is malfunctioning."
>
>Unless you used it to scan transparencies, in which case you may not have
>removed the reflective
>document mat.
>
>Cindy
Other related posts:
