You don't need to change em dashes to dashes, but you can do this in K1000. Simply make sure the numpad is on, then hold down the alt key and type 0151 in the Find box, then replace with the dashes in the Replace box.
Evan----- Original Message ----- From: "Bob W" <rwiley45@xxxxxxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx> Sent: Monday, September 26, 2011 8:16 AM Subject: [bksvol-discuss] Re: Unearthly Neighbors
Good point Ann. I am fortunate to have both MsWord 2003 and Kurzweil 1000 to proof with. I always start with word to do a few things you can't do in Kurzweil like changing m dashes to dashes. That's when your tip would come in handy. Kurzweil remembers where I left off so I don't have to.Oh yes, the first thing I always do is make a new copy of the file so I willalways have a backup. Thanks. Bob----- Original Message ----- From: "Ann Parsons" <akp@xxxxxxxxxxxx>To: <bksvol-discuss@xxxxxxxxxxxxx> Sent: Monday, September 26, 2011 6:02 AM Subject: [bksvol-discuss] Re: Unearthly Neighbors Hi all, Do it now, then you won't forget it. You can put it in the filename, or just make sure that it's in the first page of the proofing copy so you won't forget. I always make a proofing copy of a Bookshare proof. That way I've always got the original if I screw up badly enough to warrant deep sixing the working copy. Here is a small tip for a Monday morning. I put a line at the top of the working copy to remind me what page I stop at after proofing for a while. It just says: at nnnn whatever number I'm at. It's really helpful. Once I'm done proofing, I just erase the 'at' line. Makesit so much easier to use the ctrl-g command in Word to go back to my place.Ann P. -- Ann K. Parsons Portal Tutoring EMAIL: akp@xxxxxxxxxxxx web site: http://www.portaltutoring.info Skype: Putertutor "All that is gold does not glitter, Not all those who wander are lost." Email services provided by the System Access Mobile Network. Visit www.serotek.com to learn more about accessibility anywhere. To unsubscribe from this list send a blank Email to bksvol-discuss-request@xxxxxxxxxxxxxput the word 'unsubscribe' by itself in the subject line. To get a list ofavailable commands, put the word 'help' by itself in the subject line. To unsubscribe from this list send a blank Email to bksvol-discuss-request@xxxxxxxxxxxxxput the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line.
To unsubscribe from this list send a blank Email to bksvol-discuss-request@xxxxxxxxxxxxx put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line.
