Shelly, My best suggestion on this type of behavior is to first ensure that your scanner platten is completely clean. I'm sure you've done that, though. Reinstall the twain driver or the driver that you're using. If all else fails, ask for nonblindy assistance to see if the original immages have any noticeable defect by sanning images through the scanner software. As I recall, you're using an Epson. And you should be able to accomplish this through the Epson software. If you want, you can scan a few images through K1K and e-mail them to me privately at pratikp1@xxxxxxxxxx I put them through their paces. In fact, send recognition results for the same pages. Pratik Pratik Patel Director, CUNY Assistive Technology Services (CATS) The City University of New York pratik.patel@xxxxxxxxxxx -----Original Message----- From: bksvol-discuss-bounce@xxxxxxxxxxxxx [mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of juddysbuddy@xxxxxxxxxxxx Sent: Tuesday, November 15, 2005 6:32 PM To: bksvol-discuss@xxxxxxxxxxxxx Subject: [bksvol-discuss] Scanner dying How do you know when or how your scanning is behaving. I am seeing some things in my scans that are particularly annoying, but I am not sure if they are caused by the scanner, or the OCR package. They used to only happen using scansoft or "Newance" as it is called now, but now even in Fine Reader it is happening. The most annoying things are split words, not missing letters usually, and also missing letters or parts of words. I don't know if it is just the books I am using, but it is happening on a lot of different books, of different quality, so am very confused. I don't know how to tell if my scanner is hitting the dust, and of course, then the question also arises, what should I try to use instead. Sigh. Shelley L. Rhodes and Judson, guiding golden juddysbuddy@xxxxxxxxxxxx Guide Dogs For the Blind Inc. Graduate Advisory Council www.guidedogs.com The vision must be followed by the venture. It is not enough to stare up the steps - we must step up the stairs. -- Vance Havner To unsubscribe from this list send a blank Email to bksvol-discuss-request@xxxxxxxxxxxxx put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line. To unsubscribe from this list send a blank Email to bksvol-discuss-request@xxxxxxxxxxxxx put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line.