[bksvol-discuss] Re: Question about cleaning scanner glass

  • From: "Jill O'Connell" <jillocon@xxxxxxxxxxx>
  • To: <bksvol-discuss@xxxxxxxxxxxxx>
  • Date: Thu, 14 Jan 2010 18:04:05 -0800

I clean mine with a slightly damp cloth with plain water only; I know I have 
read this somewhere, perhaps even from Kurzweil. The instructions said not to 
use any cleaning product on the glass other than water. 
  ----- Original Message ----- 
  From: Bud Schwab 
  To: bksvol-discuss@xxxxxxxxxxxxx 
  Sent: Thursday, January 14, 2010 4:51 PM
  Subject: [bksvol-discuss] Re: Question about cleaning scanner glass

  That's the way I always clean my scanner and it works fine.  Just spray a 
little on it so it isn't runny and it shouldn't get under the glass.


  At 03:29 PM 1/14/2010, you wrote:

    Hi, all.
    A scanner was cleaned with Windex all-purpose cleaner, and a soft paper 
towel. I know this is not ideal, but I wonder if anyone has ever done this, 
and, if so, what the results were. If there were negative consequences, what 
would be the best way to restore the glass to its proper state?
    I appreciate any help any of you can offer.
  Bud Schwab               
  W 6 Z Y P
  Malibu, California


  No virus found in this incoming message.
  Checked by AVG - www.avg.com 
  Version: 8.5.432 / Virus Database: 270.14.140/2621 - Release Date: 01/14/10 

Other related posts: