Hi Evan,
You should note that tips on my website are produced by volunteers.
While yes, I do have editorial control over them, they do not nor will they
ever necessarily represent my perceptions or views.
I actually thought about that tip earlier and went back and read the
afending passage, and noted that it should be changed. The tips area in fact
is due for a clean up. This is an item on my list of things to do this
summer. There are in fact multiple tips on identifying copyrights that
should be merged and other excentricities.
Jake
----- Original Message -----
From: "Evan Reese" <mentat1@xxxxxxxxxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Saturday, June 03, 2006 4:49 PM
Subject: [bksvol-discuss] Re: M dash, how to make it?
Well, to say the least, certainly Jake is sending a mixed message here. I quote from the Volunteer Tips portion of his site.
Em-dash:
This character, also called a long dash, is not currently translated correctly in BRF files. Some OCR packages also substitute hyphens for em-dashes due
to problems recognizing the length of the dash.
It is also common to discover that em-dashes have been replaced by hyphens when someone downloads the DAISY copy of a book which they have submitted. This
is very likely caused by some confusion on the part of a validator since This character is probably the least familiar character common in books today.
It is used for inserting a pause slightly longer than a comma to mark a phrase that interrupts the original flow of a sentence. It is also used when a
speakers sentence is interrupted by another speaker or abruptly ends for any other reason.
In order to avoid conversion of em-dashes into hyphens either because of braille translation errors, or due to a validator's software or confusion it might
be best to replace them with two dashes. There should not be any spaces between the two dashes or on either side of them. Em-dashes may also be misrecognized
by your scanning software, so checking books for this error before submission would be a very good idea. A quick way to determine whether your book has
this problem is to search for a dash followed by a quotation mark. If you find a single short dash in front of the quotation mark instead of two short
dashes or one em-dash, than you know your book has a problem. Unfortunately, there is no quick way to locate all errors of this type.
To replace em-dashes with double short dashes you can place an em-dash in the Find box by selecting one from the text and copying and pasting it, by using
the Insert-4 command in JAWS which provides a list of characters that are difficult to produce with the keyboard, or by holding down Alt while typing 0151
on the Numb-Pad. Once you have an em-dash in the Find box you can simply type two dashes in the Replace box and select Replace All.
This does not square with what he posted up here today.
There are several other characters which need to be watched out for with respect to the Braille translation software. You can read about them all at:
http://www.jbrownell.com/bks/tip.asp?id=18
----- Original Message ----- From: "Scott Blanks" <scottsjb@xxxxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Saturday, June 03, 2006 2:28 PM
Subject: [bksvol-discuss] Re: M dash, how to make it?
Jake,
I see your point, for the most part. However, if Bookshare did in fact invest significant time and money into upgrading the braille translation, how did the m dash issue go by the wayside? Is this truly a difficult issue to resolve?
Scott
----- Original Message ----- From: "Jake Brownell" <jabrown@xxxxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Saturday, June 03, 2006 1:26 PM
Subject: [bksvol-discuss] Re: M dash, how to make it?
Hi Scott,
Pratick has in all likelihood already pointed out BookShare's position. Trying to preserve the original text as closely as possible is a good idea.
Upgrading the Braille translation is always possible in the future. For those skeptical, I point out that BookShare invested significant time last year to produce better formatted Braille files.
Also, think of it this way, if you get rid of em dashes, nothing will ever put them back. Some folks who use DAISY might even be confused when encountering double dashes, and that implies a different style of writing than does using the em dash. Bottom line is that yes, it's a minor change, but it is a change nonetheless.
What exactly is appearing in the Braille files, verses what should be? Bringing specifics like this to my attention will help Gerald and I when we attempt to punch out some lists of things that need to be addressed. Telling a programmer, hey em dashes aren't coming out right, isn't as helpful as telling him/her what is coming out rather than what should be.
Jake
----- Original Message ----- From: "Scott Blanks" <scottsjb@xxxxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Saturday, June 03, 2006 2:58 PM
Subject: [bksvol-discuss] Re: M dash, how to make it?
Currently, I'm handling m dashes as described in Evan's message. I convert m dashes to double dashes when working with the rtf files in MS Word. Is there an official Bookshare position on this?
Scott
----- Original Message ----- From: "Evan Reese" <mentat1@xxxxxxxxxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Saturday, June 03, 2006 12:35 PM
Subject: [bksvol-discuss] Re: M dash, how to make it?
I don't know what the Braille translator does with them. As I recall, it either doesn't display them properly, or it only puts in one dash instead of two, which is what you should have in the Braille file. I do know that in books I scan and read as rtf files, they are not properly displayed on my Pac Mate. I generally convert them to double dashes with a quick search and replace all in Word before sending them up to Bookshare.
I'm not changing that. I don't see why Braille readers should have to suffer through crummy-looking text because someday some future software upgrade just might fix the problem - assuming there is one.
----- Original Message ----- From: "Scott Blanks" <scottsjb@xxxxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Saturday, June 03, 2006 11:31 AM
Subject: [bksvol-discuss] Re: M dash, how to make it?
I'm curious though, which comes out better in braille: m dash, or double dash? Does it matter? I seem to specifically remember several people on this list encouraging the conversion of m dashes to double dashes for the benefit of braille readers.
Can anybody comment?
Scott
----- Original Message ----- From: "Pratik patel" <pratikp1@xxxxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Saturday, June 03, 2006 10:39 AM
Subject: [bksvol-discuss] Re: M dash, how to make it?
Cindy,
Please stick with the M-dash character when you enter it. The automated
tools may not support the proper conversion, but, we have to make sure that
future versions of those tools do support such conversions. The em-dash
character is a slightly shorter character than the double dash (--). I know
we have been working with the formatting to satisfy the stripper
requirement; but we should try to take a conservative approach when editting
the original text especially when it comes to formatting. In some cases, we
might have to move words around or make slight font changes but we should
avoid making other changes.
Pratik
Pratik Patel Director, CUNY Assistive technology Services (CATS) The City University of New York pratikp1@xxxxxxxxx
-----Original Message----- From: bksvol-discuss-bounce@xxxxxxxxxxxxx [mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Cindy Sent: Saturday, June 03, 2006 12:55 AM To: bksvol-discuss@xxxxxxxxxxxxx Subject: [bksvol-discuss] Re: M dash, how to make it?
Is Lissi right in what she says about two dashes instead of an em dash being easier to read in braile? What about with Daisy? What should I be doing, em dash or double dash?
Cindy
--- Estelnalissi <airadil@xxxxxxxxxxxxx> wrote:
Dear Jake,
Your directions worked perfectly! I'm levitating! We all know I'm not the fastest barge on the canal when it comes to computers, but your instructions put those m dashes exactly where I needed them.
The M dash will be especially easy to remember because it's insert 4 as you said for jaws, and then tapping e 4 times to reach m dash and enter not even having to go to OK!
Also exciting is the fact I saw a slew of items listed in the insert 4 dialogue box which may turn out to be useful!!
The book I'm working on is an Irish memoir. Instead of using quotes or apostrophes, there's a dash or m dash before all quotes and no mark to show the end of the quote. It's plain in print because quotes are inserted farther than the narrative, but I think braille readers will quickly catch the pattern.
While blissfully making my corrections with the new command, I noticed that the scanner read these unique indications of quotes as dash about half of the time and M dash the other half with some minus signs thrown in for variety. The mixture was random so I made a command decision to use the simpler dash to indicate quotes. I'm on page 27 now and all quotes are uniformly indicated with a single dash, easier for me and the reader.
By the way, when this book is approved, I'm going to mention that while anyone interested in quirky humor, Irish culture and recalling life from 1959 through 1960 something will like this book, but the POV, and the father, a kind of hero to the author will really appeal to the gritty guys among the members. I'm entranced, but regularly amused in spite of myself and grossed out, too.
Always with love,
Lissi
Thanks for helping me to enjoy another break through!
----- Original Message ----- From: "Jake Brownell" <jabrown@xxxxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Friday, June 02, 2006 6:52 PM
Subject: [bksvol-discuss] Re: M dash, how to make
it?
> Hi Lissi,
> There are two easy ways to insert an em-dash
>
> If you're using Microsoft Word, you can press
CTRL+ALT+the minus sign on
> the numpad.
>
> If you're using JAWS, you can press INSERT+4 (the
4 on the regular
> keyboard) and you'll get a list of symbols. Press
the letter e a few times
> and you'll find em dash, then press enter.
>
> That's all there is to it.
>
> Jake
> ----- Original Message ----- > From: "Estelnalissi" <airadil@xxxxxxxxxxxxx>
> To: <bksvol-discuss@xxxxxxxxxxxxx>
> Sent: Friday, June 02, 2006 5:16 PM
> Subject: [bksvol-discuss] M dash, how to make it?
>
>
>> Dear Volunteer Friends,
>>
>> There was a discussion here about making that
long dash called m dash by
>> Jaws using microsoft word while validating an RTF
file. How to make it
>> with other programs might have been mentioned,
too.
>>
>> What I mostly remember is that it was suggested
that just using 2 dashes
>> comes out better for the braille reader in
Bookshare's BRF file of a
>> book. So, I decided that when I had a choice, I'd
use 2 dashes.
>>
>> However, the book I'm validating is already
packed with m dashes, so if I
>> fix one, I thought it should match them.
>>
>> How do I make an m dash? Occasionally jaws calls
an m dash a minus, and I
>> want to replace the minus signs with m dashes. If
anyone can point me to
>> the answer or remind me how to do this, I'd
appreciate it and save the
>> information in my Bookshare Tips file.
>>
>> While I wait to hear about this, I'll mark the
spot and go on. I'm only
>> on page 12, but this book really motivates me to
make good progress.
>>
>> Hope all of your current endeavors are going
swimmingly. - Smile
>>
>> Always with love,
>>
>> Lissi
>> To unsubscribe from this list send a blank Email
to
>> bksvol-discuss-request@xxxxxxxxxxxxx
>> put the word 'unsubscribe' by itself in the
subject line. To get a list
>> of available commands, put the word 'help' by
itself in the subject line.
>>
>>
>>
>> -- >> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.1.394 / Virus Database: 268.8.1/354 -
Release Date: 6/1/2006
>>
>
> To unsubscribe from this list send a blank Email
to
> bksvol-discuss-request@xxxxxxxxxxxxx
> put the word 'unsubscribe' by itself in the
subject line. To get a list
> of available commands, put the word 'help' by
itself in the subject line.
>
>
To unsubscribe from this list send a blank Email to bksvol-discuss-request@xxxxxxxxxxxxx put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line.
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of
available commands, put the word 'help' by itself in the subject line.
To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line.
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.8.1/355 - Release Date: 6/2/2006
To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line.
To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line.
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.8.1/355 - Release Date: 6/2/2006
To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line.
-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.8.1/355 - Release Date: 6/2/2006
To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line.
-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.8.1/355 - Release Date: 6/2/2006
To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line.
To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line.
-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.8.1/355 - Release Date: 6/2/2006
To unsubscribe from this list send a blank Email to bksvol-discuss-request@xxxxxxxxxxxxx put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line.
