[bksvol-discuss] Re: HP SJ5590
- From: "robert tweedy" <roberttweedy@xxxxxxxxxxxxx>
- To: <bksvol-discuss@xxxxxxxxxxxxx>
- Date: Thu, 22 Feb 2007 04:17:52 -0600
As it was told on the kurzweil list yesterday, a person has to install the
lattest drivers which are FEBRUARY 12, 2007 and I was told by Nick that there
was a misunderstanding on the drivers, the drivers that come with the software
worked from I understand but it is always good to install the lattest.
For skype contact bobwichitaks
For msn contact info rt5117@xxxxxxx no emails.
----- Original Message -----
From: Katie Hill
To: bksvol-discuss@xxxxxxxxxxxxx
Sent: Wednesday, February 21, 2007 9:36 PM
Subject: [bksvol-discuss] Re: HP SJ5590
HI Pratik,
TigerDirect is the only place that has it? I thought there was a post about
getting one from the manufactures web site.
Katie Hill
You can learn a lot if you are humble enough to listen.
Lynn Lewis Warren
Email: Kaitlyn@xxxxxxxxxxxxx
503-777-7155
------------------------------------------------------------------------------
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Pratik Patel
Sent: Wednesday, February 21, 2007 5:05 AM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] Re: HP SJ5590
Robert,
Go to www.tigerdirect.com. It appears to be the only U.S. place that sells
the product. Once you do get it, contact one of us who has it and we can walk
you through the installation.
Regards,
Pratik
------------------------------------------------------------------------------
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of robert tweedy
Sent: Wednesday, February 21, 2007 5:35 AM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] Re: HP SJ5590
Katie, where did you get your scanner? I am going with the plustek.
For skype contact bobwichitaks
For msn contact info rt5117@xxxxxxx no emails.
----- Original Message -----
From: Katie Hill
To: bksvol-discuss@xxxxxxxxxxxxx
Sent: Tuesday, February 20, 2007 11:07 PM
Subject: [bksvol-discuss] Re: HP SJ5590
I would have to echo Prattik's comments. Also being a bookedge scanner you
won't have to hold books down on the flat bed. I would say the most strain
would be when scanning a large hard cover book, balancing the book until the
two half's equal out a bit.
The scanner and Kurzweil both keep up as fast as I can flip and hit scan.
Quality all and all is very goodJ
Katie Hill
You can learn a lot if you are humble enough to listen.
Lynn Lewis Warren
Email: Kaitlyn@xxxxxxxxxxxxx
503-777-7155
----------------------------------------------------------------------------
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Pratik Patel
Sent: Tuesday, February 20, 2007 2:54 PM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] Re: HP SJ5590
Depending on how much you're planning to spend, you might want to consider
the Opticbook 3600 scanner from Plustek (www.plustek.com). It can be a bit
querky, but manageable. I don't recommend HP scanners at this time. some of
the cannons aren't too bad either. You can't beat the Plustek in speed.
Pratik
----------------------------------------------------------------------------
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Barbara
Sent: Tuesday, February 20, 2007 5:43 PM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] Re: HP SJ5590
Kurzweil does not recommend HP scanners since you cannot control the
dark-light feature. I have an HP scanner and this is what I found. I bought an
Epson scanner which didn't work so I returned it and kept my HP scanner.
However, I am thinking about getting a Canon since the HP is not great. Also,
most HP scanners are not compatible with the Kurzweil software. You might want
to call Kurzweil, technical support and ask the technician before you spend
your money for an inadequate scanner.
Barbara
robert tweedy <roberttweedy@xxxxxxxxxxxxx> wrote:
This is the new scanner I'm thinking on getting. Here is my question
though. With the use on my left hand and limited use of my right, iS it easy to
use the ADF which comes with it and how do you use it with kurzweil? I saw flip
side in the menus and was wondering if you put the first page in and somehow
make it do the flip side somehow. If someone can give me the step by step
instructions, thanks in advance. I have a hard cover book here that I brought
of a book that is going to be redone because there are too manny errors in the
copy on bookshare.
For skype contact bobwichitaks
For msn contact info rt5117@xxxxxxx no emails.
Other related posts: