[baisl] Re: Maker Space on your campus or in youe library

  • From: Beth McMurphy <bmcmurphy@xxxxxxxxxxxxxxxxx>
  • To: baisl@xxxxxxxxxxxxx
  • Date: Tue, 14 Feb 2017 09:28:53 -0800

Hi Debra,

We have two tinkering teachers, both of whom have additional
responsibilities as well -- one as a technology specialist, the other as
the garden teacher. Our tinkering lab, media center, and library all fall
under the same department, and we integrate as often as we can, but we
serve discrete functions.

We are in the midst of a massive construction project that will bring our
library learning commons, media center, and tinkering space under the same
roof. Right now, the tinkering lab is in a portable, and within the next 48
hours our library will consist of an appropriated conference room and a
storage pod! Personally, I love to sew and create, so I hope to spend more
time working with our tinkering functions down the line!

You're welcome to come visit any time to meet our faculty and check out our
space. I'm happy to set up an introduction for you!

Cheers,
Beth McMurphy
Interim Library Specialist
Mark Day School <http://www.markdayschool.org/>



On Tue, Feb 14, 2017 at 8:26 AM, Renee Otero <rotero@xxxxxxxx> wrote:

Hi Debra,

We have a new maker space that is overseen by the tech and science
department.

*Renée Otero *
Library Media Center Director
San Francisco Day School
350 Masonic Avenue *|*San Francisco, CA 94118 *|*415-568-3671
SFDS LMC <http://www.sfds.net/groups/library-media-center>



On Tue, Feb 14, 2017 at 8:17 AM, Sarah Murphy <dmarc-noreply@xxxxxxxxxxxxx
wrote:

Debra,
we have a small space at one end of the library I am building into a
makerspace.  I have an interest in making things, and love to play with the
3D design software, arduino and so forth.  The girls here make use of the
space with a monthly guided (somewhat) project - this month needle felting,
next month making key fobs with the 3D printer.  The Engineering club also
does more substantial projects.  As Jessica says - the girls can be very
independant, and just having the basics is a good place to start.
I would highly recommend visiting Jessica's space - it is well set up,
and well used!

Sarah Murphy
Mercy High School - Burlingame.

On Tue, Feb 14, 2017 at 4:14 AM, Debra Cardone <cardone@xxxxxxxxxx>
wrote:

Dear Colleagues,

If you have a Maker Space, who oversees the robotics, electronics, wood
shop, sewing, laser cutting, programing or a combination of these skills?

As a librarian with a Masters Degree in Library Science, my duties have
not incorporated many of these skills, especially sewing machines.

Please get back to me ASAP about your experience with the Maker Spaces
on your campus.

Thanks,

Debra Cardone, Librarian
Hamlin School
San Francisco, CA
415-674-5414 <(415)%20674-5414>



********************************************************************

CONFIDENTIAL: The Hamlin School This email and attachments are sent

by The Hamlin School and may contain information that is privileged

or confidential. If you are not the intended recipient, please

delete the email and any attachments without reading, printing,

copying, or forwarding it, and please notify us. helpdesk@xxxxxxxxxx

********************************************************************




--
Sarah Murphy

Mercy High School Burlingame
Library Co-ordinator
650-762-1162 <(650)%20762-1162>
*Look for my blog on Schoology
<https://mercyhsb.schoology.com/user/33763411/blog>.*

Books I am reading now:
*I'm not your Manic Pixie Dream girl *- Grethen McNeil
*Timekeepers - *Tara Sim

Email disclaimer

This message (including attachment if any) is confidential and may be
privileged. If you have received this message by mistake please notify the
sender by return e-mail and delete this message from your system. Any
unauthorized use or dissemination of this message in whole or in part is
strictly prohibited.





-- 
Beth McMurphy
Interim Library Specialist
Mark Day School <http://www.markdayschool.org/>

Other related posts: